Wpa2 Enterprise.h Library Download
Selene Bulger
This example shows you how to connect to an open (not encrypted) 802.11b/g network with one of the boards that support this library. Your Arduino Software (IDE) serial monitor will provide information about the connection once it has connected.
This example shows you how to connect to a WEP encrypted 802.11b/g network with one of the boards that support this library. Your Arduino Software (IDE) serial monitor will provide information about the connection once it has connected.
This example shows you how to connect to a WPA2 Personal encrypted 802.11b/g network with one of the boards that support this library. Your Arduino Software (IDE) serial monitor will provide information about the connection once it has connected.
This example scans for 802.11b/g network with one of the boards that support this library. Your Arduino Software (IDE) serial monitor will print out information about the board and the networks it can see. It will not connect to a network.
This example scans for 802.11b/g network with one of the boards that support this library. Your Arduino Software (IDE) serial monitor will print out information about the board and the networks it can see, with the encryption type. It will not connect to a network.
The FreeRADIUS project maintains the following components: a multi protocol policy server (radiusd) that implements RADIUS, DHCP, BFD, and ARP; a BSD licensed RADIUS client library; a RADIUS PAM library; and an Apache RADIUS module.
Unfortunately, there is not any official examples for WPA3 Enterprise or Personal.
However, in order to use WPA3 personal or enterprise you will have to define the following flags on the config_generic_sdk.h file:
// // Support Wi-Fi WPA Enterprise feature. // // This feature is to support WPA3-Enterprise. And it provides EAP TLS, EAP TTLS, PEAPv0, PEAPv1. // User can check WPA3-Enterprise sub-feature is enabled by default. // // Note) If "__SUPPORT_ATCMD__" is enabled, this feature is default enabled also. // Refer to AT-CMD user's guide document for how to use it. // Note) This feature is internal feature in /library/libsupplicant.a // #undef __SUPPORT_WPA_ENTERPRISE__ // // Support Wi-Fi WPA3-Personal features. // // This feature is to support WPA3-Personal. And it provides Simultaneous Authentication of Equals(SAE), // Opportunistic Wireless Encryption (OWE). // User can check WPA3-Enterprise sub-feature is enabled by default. // // Note #1) See Wi-Fi specification to understand WPA3 SAE and OWE operation. // Note #2) If "__SUPPORT_ATCMD__" is enabled, this feature is default enabled also. // Note #3) This feature is internal feature in /library/libsupplicant.a // // #undef __SUPPORT_WPA3_PERSONAL__
You can also refer on the easy_setup.c file which contains all the functions to configure the DA16200/DA16600 via the debug Console log by typing setup.
By defining the macros mentioned above, you will have access on the WPA3 options on the easy_setup.c file to see the procedure we follow to setup as station or AP.
Best Regards,
OV_Renesas