Navcam and Dockcam are out of map when start

Nontacha KOSEN-KMITL

unread,

May 18, 2020, 9:20:52 PM5/18/20

to 1st Kibo Robot Programming Challenge communication and QA forum

I'm Nontacha Team: Sei-kou Thailand

When start the simulation the Navcam and Dockcam are not it properly position.

Thank you.

05-18 17:21:59.220 D/OpenCv ( 3523): OpenCV loaded

05-18 17:22:00.437 I/Registrar( 3523): MasterXmlRpcEndpoint URI: http://llp:11311

05-18 17:22:01.749 I/Registrar( 3523): Registering publisher: Publisher<PublisherDefinition<PublisherIdentifier<NodeIdentifier</kibo_rpc_api, http://hlp:57289/>, TopicIdentifier</rosout>>, Topic<TopicIdentifier</rosout>, TopicDescription<rosgraph_msgs/Log, acffd30cd6b6de30f120938c17c593fb>>>>

05-18 17:22:02.969 E/ipv6proxy( 3563): Failed to get interface flags for wlan1: No such device

05-18 17:22:03.029 E/hostapd ( 3564): Configuration file: /system/etc/simulated_hostapd.conf

05-18 17:22:03.052 E/hostapd ( 3564): Could not read interface wlan1 flags: No such device

05-18 17:22:03.054 I/hostapd ( 3564): nl80211: Driver does not support authentication/association or connect commands

05-18 17:22:03.057 I/hostapd ( 3564): nl80211: deinit ifname=wlan1 disabled_11b_rates=0

05-18 17:22:03.057 E/hostapd ( 3564): Could not read interface wlan1 flags: No such device

05-18 17:22:03.058 E/hostapd ( 3564): nl80211 driver initialization failed.

05-18 17:22:03.058 I/hostapd ( 3564): wlan1: interface state UNINITIALIZED->DISABLED

05-18 17:22:03.058 I/hostapd ( 3564): wlan1: AP-DISABLED

05-18 17:22:03.058 E/hostapd ( 3564): hostapd_free_hapd_data: Interface wlan1 wasn't started

05-18 17:22:03.965 I/Registrar( 3523): Response<Success, Registered [/kibo_rpc_api] as publisher of [/rosout], [http://10.42.0.34:35897/, http://10.42.0.34:40915/]>

05-18 17:22:04.057 I/DefaultPublisher( 3523): Publisher registered: Publisher<PublisherDefinition<PublisherIdentifier<NodeIdentifier</kibo_rpc_api, http://hlp:57289/>, TopicIdentifier</rosout>>, Topic<TopicIdentifier</rosout>, TopicDescription<rosgraph_msgs/Log, acffd30cd6b6de30f120938c17c593fb>>>>

05-18 17:22:04.371 I/Registrar( 3523): Registering subscriber: Subscriber<Topic<TopicIdentifier</clock>, TopicDescription<rosgraph_msgs/Clock, a9c97c1d230cfc112e270351a944ee47>>>

05-18 17:22:04.694 I/Registrar( 3523): Response<Success, Subscribed to [/clock], [http://10.42.0.34:37235/]>

05-18 17:22:04.728 I/DefaultSubscriber( 3523): Subscriber registered: Subscriber<Topic<TopicIdentifier</clock>, TopicDescription<rosgraph_msgs/Clock, a9c97c1d230cfc112e270351a944ee47>>>

Kibo-RPC Secretariat

unread,

May 26, 2020, 12:54:10 AM5/26/20

to 1st Kibo Robot Programming Challenge communication and QA forum

Sometime, the problem is appeared because simulator has some bugs out of our development.

How often is it occurred? When did you execute the simulator?

Warm regards,

Kibo-RPC Secretariat

Nontacha KOSEN-KMITL

unread,

May 27, 2020, 12:21:13 AM5/27/20

to 1st Kibo Robot Programming Challenge communication and QA forum

It only few times that occurred. And the time I think it about 18/05/2020 17:20 (GMT +0) (Time as show in Log that I mention in post).