Enable Game Dvr Windows 10 Registry

0 views

Skip to first unread message

Message has been deleted

Benedicte Mansukhani

unread,

Jul 9, 2024, 5:43:30 PM7/9/24

to khusweicarpo

You can use the registry for fine-grained control over the protocols that your client and/or server app negotiates. Your app's networking goes through Schannel (which is another name for Secure Channel. By configuring Schannel, you can configure your app's behavior.

Start with the HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols registry key. Under that key you can create any subkeys in the set SSL 2.0, SSL 3.0, TLS 1.0, TLS 1.1, and TLS 1.2. Under each of those subkeys, you can create subkeys Client and/or Server. Under Client and Server, you can create DWORD values DisabledByDefault (0 or 1) and Enabled (0 or 0xFFFFFFFF).

I know that your article is newer but at the end I think it makes not a difference if you try 0xffffffff or use a 1.

enable game dvr windows 10 registry

Descargar Zip https://urluss.com/2yPevd

To disable a cipher, create an Enabled entry in the appropriate subkey. This entry does not exist in the registry by default. After you have created the entry, change the DWORD value to 0. When you disable any algorithm, you disallow all cipher suites that use that algorithm. To enable the cipher, change the DWORD value to 1.

In order to override a system default and set a supported (D)TLS or SSL protocol version to the Enabled state, create a DWORD registry value named "Enabled" with a non-zero value, and a DWORD registry value named "DisabledByDefault" with a value of zero, under the corresponding version-specific subkey.

@AndrePKI any news here? A colleague ran Exchange HealthChecker and it reported issues regarding TLS 1.2 Enabled-Key which is 0xffffffff instead of 1 (controlled by GPO in our case)...Not sure if we should set to 1 again...

I am an admin, and attempting to disable "Windows Hello for Business" also referred to as 2-step authentication. From what I gather, this option is set as "disabled" by default. I confirmed this. However Whenever I join a device to Azure AD, it is always prompted with "Windows Hello" and to create a pin. Where can I find the option that allows me to disable this?

The idea is solid, but as with virtually all of the recent 365 'improvements' turned on by default (clutter, focussed inbox etc) they're being foisted on users that don't need them, they are tricky if not impossible to remove, and just generate support issues needlessly.

I also strongly recomend disabling it for now. But it is possible to use hello and a local nas although it is not recomended... you need to change login alternative and choose other user and log in by that was but it is much more inconvinient than just not using Hello.

@ErikROsberg There is no need for extra local accounts if you use a NAS. Just make a network connection to your NAS and save it as you connect. That way the credentials will be stored in the Windows Credential Manager (press "start" and type "credential manager" to launch it). You can then easily logon to windows using Windows Hello and the link to your NAS will just work on the basis of your stored password.

@James King This is definitely still happening. Any network drive will not be able to be accessed if using Windows Hello. It will say "A specified logon session does not exist. It may have already been terminated."

Why do they do this? When they do **bleep** like this I honestly feel like signing every single microsoft center up to scientology, jehovas witnesses, other various spam packages and see how they like being bombarded with CRAP noone asked for. F*** OFF!

My problem with it is that it's invasive. At no point are you asked if you want to activate it and there's no obvious way to disable it. I could probably disable it if I had the time, but for gods sake. Why force it upon people without asking? It's dirty practices and deserves to be spat on.

@James King
You are absolutely correct. Same deal, a NAS is blocked for the only user of 3 AD-Joined systems who uses the Hello PIN. When that single user logs in w/ regular password, NAS access is fine.

@Thierry Vos
They use their AzureAD joined email address & password to connect to the NAS share (which was shared for Public/Everyone on the NAS side). Tell user to choose the "Key" icon at login (Other logon options) and use those creds, and they're all fine.

Tried hacking the Registry for the Hello PIN, since MS disables your ability to change it when AzureAD joined...unless you pay for a certain Tier (or Add-on) within Azure itself. No go...Registry hack didn't help. So if you created/chose the option to use a Hello PIN when joining the workstation to Azure, you're stuck w/ the OPTION.

This is Azure's habit, you pay for this, you pay for that, you subscribe for this, you subscribe for that, for more of that, for ability to do that, etc.. It's not my preference, over a local Domain w/ local Domain AD joined computers being the standard and long term (long term) cost savings.

Disclaimer: The registry is a database in Windows that contains important information about system hardware, installed programs and settings, and profiles of each of the user accounts on the computer. Windows often reads and updates the information in the registry.

Normally, software programs make registry changes automatically. You should not make unnecessary changes to the registry. Changing registry files incorrectly can cause Windows to stop working or make Windows report the wrong information.

@RyanRoe I feel your pain! I have exactly the same issue. I've tried everything I can think of and I can find on the interwebs including multiple points in the network connection chain...with two separate computers (one a laptop and one a desktop). I had the network all talking nicely to each other as well as the NAS drive for awhile but then I made the mistake of a WIndows 10 update. Still trying to recover...

As an aside to previous comments on the subject, Synology (one of the two main NAS drive manufacturers) told me via a technical support enquiry that they do not support Windows Hello installations. I generated this enquiry while trying to attach a brand new DiskStation NAS (26 June 2020) to my network.

From many websites you can find that making a file named: ["Enabled"] of "DWORD value 32 bit" in theregistry location: [Computer\HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows Script Host\Settings]will solve the issue. Here Changing / setting the value "0" means "Windows Script host is disabled."and "1" indicated to "enable" it.

Here comes the complexity:
The time you make such file and set to 0, reverting back to old state might not work for you. I set the value back to 1, deleted the file, recreated it. Nothing was working. 20 to 30 websites were telling only to edit the value but not telling anything further. I was becoming paranoid.

If you keep the Windows Script Host disabled, then you cannot see the error message. If any particular script file is causing the error to be triggered, you cannot see except the message "Windows Script Host is Disabled on this machine!".

So, in the command line you'll see:-> "Operation completed successfully!"[As each command you execute]
Final result: When you click on wscipt.exe, it no longer shows you that error message of being disabled!

This article describes how to enable logging on Receiver for Windows using registry entries.
While the registry method is provided as an alternative solution, users are advised to prioritize the Diagnostic Tools for a more efficient and user-friendly troubleshooting experience, and it is strongly recommended to resort to this approach only in cases of significant difficulties with the Diagnostic Tools.

Remote Registry is a Windows service which allows a non-local user to read or make changes to the registry on your Windows system when they are authorized to do so. Users may configure a site to temporarily enable Remote Registry on all Windows devices as they are being scanned. This allows information to be retrieved from the registry and means Nexpose can collect more accurate data from the assets.

In the site configuration, a user will need to add credentials that have appropriate permissions on the target systems to read from the registry. Once the scan is complete, the Remote Registry service will be returned to its prior state. Only a Global Administrator or Administrator may enable the Remote Registry Activation.

To disable Remote Registry for a site, an authorized user can update the template that is being used for a site in the site configuration or select a different scan template that does not have the option switched on.

The most important aspect of Windows credentials is that the account used to perform the checks needs privileges to access all required files and registry entries which, often, means administrative privileges. If you do not provide Tenable Nessus with credentials for an administrative account, at best, you can use it to perform registry checks for the patches. While this is still a valid method to find installed patches, it is incompatible with some third-party patch management tools that may neglect to set the key in the policy. If Tenable Nessus has administrative privileges, it checks the version of the dynamic-link library (.dll) on the remote host, which is considerably more accurate.

To create a domain account for remote, host-based auditing of a Windows server, the server must be a supported version of Windows and part of a domain. To configure the server to allow logins from a domain account, use the Classic security model, as described in the following steps:

This allows local users of the domain to authenticate as themselves, even though they are not physically local on the particular server. Without doing this, all remote users, even real users in the domain, authenticate as guests and do not have enough credentials to perform a remote audit.