The Laguna Pro Shaper combines a precision shaper with features normally found only in much higher priced machines. The fit and finish on this machine is top notch and even includes a wheel kit built right into the base.The Laguna Pro Shaper is designed to give you years of trouble free performance without breaking the bank.
The LF Wakesurf Edge Inline Pro Wake Shaper 145 will make big wakes BIGGER! The Inline Pro 145 requires a flat surface measuring 3" tall by 13" long - hulls with an outward curve of more than 1/4" over 5", this is YOUR shaper! WSE suction cups will accommodate hull curvature.
This model of the WSE Line Up is essentially universally compatible, making it work on most makes and models of boats. The adjustable design allows you to shift the WSE location on the fly to fine tune the perfect wave.
Like all Grizzly Shapers, the G0608X comes with a 1-year warranty which covers parts and assures the unit is free from factory defects. (Consumables are not covered by the warranty.)\nThe G0608X manual was written by our U.S. based Technical Documentation Department and is packed with useful information. The complete and easy to read manual makes it easier to assemble and maintain your shaper.\nThe Grizzly Customer Service and Technical Support Teams are U.S. based. Parts for the shaper may be available online and shipped from the Grizzly parts warehouse in Springfield, MO.
The G0900 manual was written by our U.S.-based Documentation Department and is packed with useful information. The complete and easy-to-read manual makes it easier to assemble and maintain your spindle shaper.
The precision-ground cast-iron table of the G1026 measures 28-1/4\" x 30-1/2\". The two-piece cast-iron fence is independently adjustable for different cutting thicknesses and special shaping applications. It is also removable for easy replacement with a zero-clearance or other custom-made fence.
The G1026 manual was written by our U.S. based Technical Documentation Department and is packed with useful information. The complete and easy-to-read manual makes it easier to assemble and maintain your shaper.
The full-capacity W1702 3 HP Shaper will handle the smallest profile cutters, all the way up to the largest panel cutters with its three included spindle sizes, 3\" spindle travel, and 5-1/2\" maximum cutter diameter capacity. \nThe 3 HP motor rotates the spindles at reversible speeds of 7000 and 10,000 RPM, providing the greatest flexibility for accommodating cutters of all sizes. \nThe cast-iron table is precision-ground and measures 28-1/4\" x 30-1/2\". \nThe two-piece cast-iron fence is independently adjustable for different cutting thicknesses and special shaping applications. It is also removable for easy replacement with a zero-clearance or other custom-made fence.
The W1827 manual was written by our U.S. based Technical Documentation Department and is packed with useful information. The complete and easy-to-read manual makes it easier to assemble and maintain your shaper.
The W1674 manual was written by our U.S.-based Technical Documentation Department and is packed with useful information. The complete and easy-to-read manual provides full instructions on how to assemble and maintain your shaper.
We offer U.S.-based customer service and technical support to get your questions answered and help keep your equipment running in top condition. And to ensure your satisfaction, the G5912Z comes with a 1-year warranty.
Increase your shaper production abilities with the G8622 5 HP Sliding Table Shaper thanks to the sliding table and tilting spindle.\nNow, even the most complicated profiles can be made quickly, consistently and safely on all sides and sizes of workpiece.\nThe G8622 is intended for heavy-duty professional use; it features a 5 H.P. single-phase motor, 220V operation with magnetic power switching, and full reversing capabilities. \nIt handles cutters up to 5-7/8\" diameter by 5-1/8\" tall. The four speed V-belt drive system lets you slow down those big cutters from 10,000 RPM to 3600 RPM. \n The G5912Z comes with three interchangeable spindles 3/4\", 1\", and 1-1/4\" plus three table inserts 7\" OD x 3-1/2\" ID, 3-1/2\" OD x 3\" ID, and 3\" OD x 2\"ID.\nLike all Grizzly shapers, the G8622 comes with a 1-year warranty which covers parts and assures the unit is free from factory defects. (Consumables are not covered by the warranty.)\nThe G8622 manual was written by our U.S. based Technical Documentation Department and is packed with useful information. The complete and easy-to-read manual makes it easier to assemble and maintain your shaper.\nThe Grizzly Customer Service and Technical Support Teams are U.S. based. Parts and accessories for the shaper may be available online and shipped from the Grizzly parts warehouse in Springfield, MO.
The G0510Z 1 HP is an upgrade for hobbyists and cabinet shops over using stand-alone routers. To give the user a wide range of flexibility, it can use both shaper cutters and router bits.Shaper cutters are larger and generally last longer than router bits. If you plan on cutting many linear feet of a certain profile, then shaper cutters are the best choice.Router bits are cheaper than shaper cutters and come in a wider range of profiles and sizes. If you plan on making smaller projects that do not require many linear feet of cutting, then router bits are the economical choice.The G0510Z shaper includes two table inserts with inside openings of 1-3/8\" and 1-3/4\". The table counterbore without an insert installed is 3\" in diameter. Use the smallest opening that a particular cutter will allow. This offers more support for the workpiece and reduces the amount of chips that can fall into the machine.Equipped with a forward and reverse switch, the shaper, in most cases, should be run in the forward direction. The 1 HP motor rotates the 3\"-long, 1/2\" diameter spindle at 13,200 RPM.Each side of the fence is independently adjustable to compensate for different cutting thicknesses and special shaping applications.The G0510Z manual was written by our U.S.-based Technical Documentation Department and is packed with useful information. The complete and easy-to-read manual makes it easier to assemble and maintain your shaper.CSA certified
We offer U.S.-based customer service and technical support to get your questions answered and help keep your equipment running in top condition. And to ensure your satisfaction, the G0510Z comes with a 1-year warranty.
Make waves with the all new Wakesurf Edge Pro 100 Wakeshaper! This compact design punches way above its weight class, boosting your surf wave without breaking the bank. Its patented concave water-channeling face and strong suction cup attachment make this floating wonder a must-have for any boat. Use it to churn out a great wave on smaller boats, or double up with a Wakesurf Edge Folding Mega for an epic wave on bigger boats. You can even use the Pro 100 to crank up the foiling wake on your jet ski. Shred on!
Yes, and in most cases, it will result a better wave than your stock built-in surf system. For surf systems with tabs that come out of the sides of the hull such as Malibu's Surf Gate, you will achieve best results by placing the Wakesurf Edge Shaper in front of the surf gate, but higher up on the hull. This way some water is deflected by both the Wakesurf Edge and the Surfgate, and you will see a noticeable increase in wave length. For surf systems that use tabs that flip down, you will see the best results by simply not using those tabs. These types of systems fight against the Wakesurf Edge Shaper when engaged.
Each hull is a little different, and different results can be achieved by slightly changing the angle at which you attach your shaper, and by slightly changing the distance from the back of the boat where you attach it. Your ideal setup will be a matter of personal preference, so we recommend trying different positions and angles to find your favorite spot. Generally, moving it further back with make the wave steeper, and moving it further forward will make the wave longer. Thanks to our water channeling design, angling the nose of the shaper up can also help increase the length of the wave on some boats. That being said, it is super easy to move around, and it will work beautifully in many different locations and angles.
Do not tether! Part of making the best shaper in the world requires it to induce greater forces than other devices, and tethering it could cause it to slingshot back into the boat, causing damage or injury. If for some reason it ends up detached in the water, it floats well and can be retrieved easily.
We engineered Wakesurf Edge Shapers to make the best wave. We are so certain that Wakesurf Edge will make a better wave than any other shaper out there, that we let you try it out completely RISK FREE with free shipping AND free returns within 30 days of purchasing! If you don't love your new wave, you can return your Wakesurf Edge shaper for refund any time during the trial period.
c80f0f1006