Windows 11 Hotspot 2.4ghz

[Sullivan Maurer]

Beforefresh installing windows 10 I had an option to create 2.4 ghz and 5 ghz hotspot, but after installing windows 10 again there is no option to create 2.4 ghz hotspot! I wonder whether it's a driver not installed or windows has this new feature.

Go to Wi-Fi settingsClick on Change Adapter Settings or Network and Sharing options (you can get to it though both)Click on the Wi-Fi adapterClick on ConfigureClick on Multi Channel Concurrent in Advanced settingsScroll to Enabled + Hotspot

1. Although your computer is connected trough LAN connection, in Settings Network & internet, switch Wifi to ON and connect your computer to 5GHz WiFi band (so now, your computer is connected to Internet trough Ethernet and Wifi 5Ghz).

Sorry, but I don't have other ideas. Could be that there is some specific problem with AX200 on Windows 11. For me Mobile Hotspot 5GHZ and 2.4 GHZ working on Windows 11. I've checked on three NUC computers running on Windows 11. Two computers with AC 8265 adapter and the third with AX 201. See the attached image.

Please download and run the Intel System Support Utility for Windows. Select all data categories and then have it generate a report. Next, have the tool Save the report to a text file (don't try to use the Submit capability; it doesn't work). Finally, using the Drag and drop here or browse files to attach dialog below the edit box for the body of your response post, upload and attach this file to the response post.

Based on the SSU report, we can confirm that the wireless driver currently installed on your computer is version 22.80.1.1, which is a driver provided by Intel. "Actually I don't know my issue is directly connected to intel driver or windows 11", yes, it could be very well related to Windows* 11 itself, especially based on the fact that you are currently using the latest Intel wireless driver version for Windows* 11.

Just to let you know, the Intel wireless drivers are generic, meaning they might or might not work with your system. For that reason, we always recommend to install the wireless driver provided by the manufacturer of the computer, since that driver was customized by them to work with your specific platform.

I looked on MSI's website, and even though they have some drivers available for Windows* 11, there is no wireless driver available for that operating system, which indicates it might not be validated yet as fully compatible with the board, at least in reference to Wireless drivers.

Even though you mention "Unfortunately I cannot test case with mobile hotspot on windows 10." Still, they do have a wireless driver available for Windows* 10, version 22.70.1.1, for testing purposes you can always try a clean installation of that driver following the instructions in the links below, even if you are using Windows* 11:

and about the driver V. . 22.80.1.1 its new driver that came yesterday And according to what is written in the changes, this should not affect my card at all because my card is an ax210 and not an ax211

"I decided to change one by one properties in advance tab and after changes some of properites hotspot 5GHz started working. After restart PC driver properties was the same but hotspot 5GHz doesn't work. If I continued to change random driver properties after some time I could run hotspot 5GHz."

If you do not remember the random driver properties that you changed, that is no problem, please let us know so we can do further research on this matter, keeping in mind that the root of the issue could be related to incompatibility between the Operating System and the platform being used.

Just in case, you can also use the option to submit your inquiry on a new thread, the reason for this is that every scenario is different even if the same product is being used, so for us to better assist you and in order to try to fix the problem, you can submit a new thread:

Just in case, you can always get in contact directly with the manufacturer of your Router in order to be able to configure it manually and set the 149, 153, 157, 161, 165 channels with a frequency of 5 GHz, or at least one of them and then try to use the 5GHz mobile hotspot.

"So I'm wondering why russian restrictions are applied in Ukraine?", In most cases, that is something you will need to check directly with the manufacturer of the laptop. Still, we will do further research on this question and the other ones you just posted. As soon as I get any updates I will provide all the details on this thread.

I just received an update on this matter. Just to let you know, actually, in different countries/regions the band 5GHz is not supported yet, and when is implemented, OEMs (Original Equipment Manufacturers) release BIOS updates/drivers to enable the support. You mentioned that maybe Russian restrictions are applied to your country, and yes, that is a possibility since 5GHz hotspot is still not supported in Russia.

Since the Operating System (OS) is involved too, the best thing to do at this point would be to make sure that the BIOS, OS, and other drivers are up to date and to check with the ISP (Internet Service Provider) directly about the support of the 5GHz hotspot in your country.

Intel does not verify all solutions, including but not limited to any file transfers that may appear in this community. Accordingly, Intel disclaims all express and implied warranties, including without limitation, the implied warranties of merchantability, fitness for a particular purpose, and non-infringement, as well as any warranty arising from course of performance, course of dealing, or usage in trade.

I have two Archer T3U Wifi adapters that are connected to two computers with Windows 10. I set up a mobile hotspot on one of the computers and connect with the other to it. Ths works, but I cannot get the nominal speed of the connection above 173.3 Mbps (displayed in the virtual adapter properties, I measure around 130 Mbps, which is what I would expect with that connection speed). The adapter advertises a speed of 867 Mbps, how can I use the full bandwidth for my hotspot?

4. disabling 2.4 GHz (the settings page for the windows mobile hotspot displays a warning that some devices may not be able to connect to 5 Ghz networks, so I think it actually creates a 5GHz network)

thank you for your reply! The 173.5 Mbps is indeed the displayed connection speed of the mobile hotspot, the 130 Mbps I achieved by testing with iperf3 (which is reasonable for the 173.5 Mbps connection speed, I guess). I will explain again my setup with some screenshots below.

I ran iperf3.exe -s on computer #1 and connect my laptop as a client and get the 130 Mbps transfer speed which I think is reasonable given the low connection speed. I mainly did the iperf test to see if the connection speed would increase under load (because of energy saving). The aim would be to increase connection speed to the advertised 867 Mbps (and with that, of course, actual transfer speed).

For many months I've accessed a public xfinitywifi hotspot using my tablet which only supports 2.4 GHz wifi. About 3 weeks ago it stopped being able to connect to it. In fact it doesn't even show up on the list of available networks. Yesterday and today I checked it out again using my phone (which supports both 2.4 and 5 GHz wifi) and found that the hotspot was no longer broadcasting on 2.4 GHz. Only on 5 GHz. The phone connected to it just fine on 5 GHz. So it seems like the hotspot is still functional, but has stopped broadcasting on 2.4 GHz. How can I get it to resume operation on that frequency?

As background, this hotspot is on a utility pole in a commercial/industrial park, and not associated with any of the nearby businesses (I checked with all 3 nearby businesses and all use Verizon as their ISP). I used the signal strength of the 5 GHz wifi from the hotspot to pin down its position to the pole (the signal is -40 dB at the pole and between -55 and -60 dB near the adjacent buildings).

I have tried contacting Comcast technical support by phone, but can't get through the automated system as it does a check on my home internet and tells me that all is ok. I got through to Comcast technical support chat from Facebook, and was told that all hotspots where associated with homes or businesses and that they couldn't do anything about how they worked (I think they were just blowing me off).

Finally I have found someone experiencing and explaining EXACTLY what has occurred to me in the last 2 weeks, only, this is happening to my xfinitiywifi SSID being broadcast from my home router. Both xfinitywifi and XFINITY can only be connected to via 5Ghz devices. Devices that are 2.4Ghz can not even see these SSID's to connect to them. VERY frustrating.

As I explained earlier in this thread, I am not trying to access a hotspot eminating from either another customer or a business. The hotspot is located on a utility pole outside in the open, and no customer or business within a quarter mile has Comcast internet service (they all use Verizon).

I do not understand the distinction between a public hotspot and a Comcast Gateway, so I can't address which of those I am using. As I wrote, the address listed on the Xfinity Hotspot app is 99 Airpark Road, Princeton, NJ 08540 (this in not where I have my xfinity internet service). I have attached a screenshot from the app showing the hotspot and its address. I have also attached a screenshot of details about the hotspot from the app where it confirms that the hotspot is located outdoors, not inside a customer's or business' facility.

So, summarizing, the xfinity hotspot that I had been accessing on 2.4 GHz and would like to access again on 2.4 GHz is not affiliated with any Comcast personal or business customer. It is located outside in the open and at least a quarter mile from any other location with Comcast internet service. So it must be under direct Comcast control, as there is no one else to control it. How can I get Comcast to restore service on 2.4 GHz from this hotspot.

3a8082e126