Epson T60 Resetter For Windows 7 64 Bit
Earleen Statham
Important Note: Though there are different approaches to resolve counterfeit and used HP ink cartridge errors, some users report that none of these methods work for them, leading to complaints.
Im still having a hard time with my wf4830 pro US version. Its impossible. I got a chip resetter physical and it did not work. Is there anyone who has successfully converted a wf4830 pro US to a sublimation printer? I have been looking for months now, please contact me if you have or know someone who has thank you in advance!
Which multi function wireless photo printer , do you recommend as giving good quality results, and easy to make use 3rd party cartridges. Not bothered about speed .
Want good quality photo prints up to A4, able to print wirelessly from phones etc.
Most important no functionality can be disabled that can not be simply overridden.
Hi Rob,
Thank you for clear explanation of resetting cartridge chips. I wonder whether you could send me a link that describes contacts on the Epson SX235N chip, their numbers, functions, type of chip, and possibly the schematic diagram of connections.
Andrew
Flip that cartridge over and look at the contacts, Vai. If you place a piece of tape over the top contact of the second row from the right, and a piece of tape over the bottom contact of the third row from the right, you may be able to fool your HP 404dn into believing the ink cartridge is full. You can remove the tape on the cartridge once your HP 404dn starts printing a test page. This video goes into more detail. Good luck!
Try these steps from HP support, Ashley.
1. Remove the cartridges from your printer.
2. With the printer turned on, unplug the power cord from the back of your printer and wait 30 seconds.
3. Plug back in and power up the printer.
4. Reinstall the ink cartridges when the printer requests them.
You can learn more about HP error messages here.
Good luck, Ashley! Avoid future problems by sticking with OEM ink cartridges!
The Sawgrass SG500 is a fine sublimation printer, Duane, but resetting the chips can be a challenge. This video shows a user having success by replacing the chip on his SG500 cartridges. Check it out!
Hi Rob, Firstly thank you so very much for such an informative write up, its very well written, will plenty of detail. I own the epson 440 and my search for resetting the cartridges led me here to your website. You mentioned their are 3rd party chip resetting firmware/programs available, some of them being free, do you have any suggestions on where im able to download one. Most ive come across are free, but will lock you out of the printer without buying an activation code.
Your experience is not uncommon, Vito. Third-party cartridges are notorious for giving incorrect ink levels. The best advice we can give is to stick with genuine HP ink cartridges. They cost more, but they work right every time!
According to Primera, you should go to the control panel on your LX500 and select Printers and Faxes.
Select your printer and click on Printing Preferences. You can choose Clean/Change Cartridges, Check Ink Levels, or Ink Levels and Cartridge Maintenance under preferences. Any of these choices should reset your Primera LX500 cartridges.
Click the Change button.
Choose which cartridges you are changing, black or color.
Best of luck, Muz!
Hi, I have tried everything possible with my Hp 63 original in cartridge. to override. It is still showing ink level depleted even after I have reinked the cartridge and over the chip thing the test print comes out perfect showing the colors and it said it has aligned however when I print my document it comes out black and white only and showing me estimated ink level for the color is empty.
The color cartridge is full. Can you show a picture of where to cover on the HP 63 chip after refilling the ink please.
Have you tried this, Kevin?
1. Turn off your T210
2. Unplug it from the wall
3. Remove all ink cartridges
4. Plug in and restart the printer
5. Replace the ink cartridges when prompted
Sometimes this works. There is a good guide to troubleshooting DesignJet T210 problems here.
How can I reset a Brother LC404 ink cartridge for a Brother J1205W printer? I doesnt seem to have a reset button on the cartridge, and I cannot find a cartridge resetter available online. I am very frustrated with this as I bought the printer because it was advertised with the Inkvestement Tanks which I thought were refillable. Great information in your site here. Thanks
I have Kyocera 3155DN printers that I just bought from UK. They use different power in the US but I have a transformer that takes care of that issue. However the toner the UK printer uses is TK-3190 and the toner the US version uses is TK-3182. Will a reset chip allow me to use the TK-3182 in the UK printer?
Hello, is it possible to reset chips for Canon imageprograf Pro 6100S.
There is 8 cartridges. I just replaced one chip with Canon IPF-1700 chip although it is not the same chip. It works!
Other 7 color chips I would like to reset somehow.
There is no reseter on the market. There is no buttons to press on the cartridges.
If you poke around the interwebs, you should be able to find replacement chips for your Kodak 10 series cartridges, Steve. The installation process for Kodak 10 series chips is pretty straightforward.
1. Remove the ink cartridge from your Kodak inkjet printer.
2. Turn the cartridge over.
3. Press the plastic clip holding the chip in place inward until the chip slides down and off the ink cartridge.
4. Cut the plastic clip that holds the chip in place off the ink cartridge.
5. Slide the new chip into place. It will have an adhesive backing. Align the longer side of the chip with the left side of the cartridge.
6. Reinstall the cartridge and print away!
I have a Canon Pixma 4210 printer. The printer was great until I did a fast clean then a deep clean as the printing was spotty. The procedure said it will use a lot of ink and to make sure the ink tubes were not empty so I partially filled, above the half way mark, and pressed Deep Clean. Error code 5800 came up and everything was frozen and 5800 says to take it in for repair. I can not find a Canon Printer repair facility near 32174.
Can anyone offer any help. The Canon site is canned responses only and of no useful help so far.
I have a Primera LX-2000 . I have been trying to find an chip resetter or a solution to use aftermarket ink. I have even explored modifying the firmware. The only solution I can find are replacement chips which still make this printer ridiculously expensive to use due to the high cost of the primera ink cartridges. Rob, you seem to be the ultimate guru on finding workarounds ? . Your knowledge is impressive. Do you have any ink workarounds for this Primera model?
Hi team c4t is possible to reset the inks bought from HP instant ink ? The issue is that the inks are only working if i keep paying them each month. I do not use the printer so often and its not worth it so after 2 years I decides to cancel my subscription and have to full setts of unused inks that I cant use now ;((
Hi, I have an Epson WF-2750 from the US, which uses 220XL cartridges, I moved in Europe, where these cartridges are not sold, and the EU version of the WF-2750 uses 16XL instead.
Is there a way I can reprogram the chip of some new 16XL cartridges so ti can be detected? Or may be do something on the printer side (flashing new firmware which would not check the chip?).
Thanks
Hi Rob, I try to find everywhere to reset Brother LC432 ink, im not sure if I do something wrong, I cover the sensor with black tape but still not working, clearly it still has ink inside, can you please give me some advice? Appreciate
I have a an Epson WF Pro 4630 running on compatible ink cartridges. I have done so for several years. I received a message replace BLK Cartridge which I did. The error message came up cartridge not recognised. I followed instruction and then the next message was cartridge installed correct close lid. Now it just loops around and will not accept the BLK ink cartridge. I have turned off, unplugged, removed cartridges, turned on again with no cartridges. Replaced all cartridges and the same message. All the other cartridges are compatible and being recognised it is only the BLK XL 7861 not being recognised. I opened a new cartridge, cleaned all the terminals, reset the printer, and still keeps telling me I need a new BLK Cartridge. How can I disconnect or stop the firmware checking cartridges? Help! and thank you in advance any printer geek that can help.
e59dfda104