3dmark 11 Scores
Niklas Terki
Our Hall of Fame is a showcase for the best benchmark results of all time. Here you will find the top 100 scores for 3DMark, VRMark, 3DMark 11, 3DMark Vantage and 3DMark 06 submitted by the world's most talented overclockers. Competition is fierce so check back often to see who is holding the top spot.
We've improved our score validation checks. You must now use 3DMark v2.21.7324 or later to be eligible for the Hall of Fame. 3DMark scores from older versions submitted after December 10, 2021 will no longer appear in benchmark search results.
We've improved our score validation checks. New 3DMark scores submitted after February 5, 2018 must use >3DMark v2.4.4254 or later and SystemInfo 5.4 or later. SystemInfo hardware monitoring must also be turned on for the benchmark run. You can find this setting on the 3DMark options screen.
The Hall of Fame now only displays historical scores submitted using SystemInfo 4.34 or later. New scores must use SystemInfo 4.40 or later. New scores for 3DMarkFire Strike, Sky Diver, Cloud Gate, and Ice Storm must use 3DMark v1.5.915 or later. These changes ensure that the Hall of Fame only includes scores that have passed all of our latest validation checks.
Post your ridiculously high 3DMark Ice Storm official benchmark scores below.
edit:
Be sure to run Ice Storm Unlimited for a higher score and not the Vanilla Ice Storm bench by mistake.
I did not specify earlier. My bad.
My PC was running slowly because I neglected it. I just got finished doing a fine tuning every setting in the control panel, cleaning junk files, defragging, overclocking CPU to 4.6 GHz then the GPU right to the edge tune-up.
Might have to do that, I can get my 4690k to 4.6GHz but VRMs on the motherboard get super hot so I kept it at 4.4 GHz @ 1.250V. I also had my 970 overclocked but after my brother let me use his 980 I haven't got around to overclocking it yet.
the only difference is unlimited is rendered off your main screen,
unlimited will have the highest scores
Devices that are too fast for Ice Storm will be prompted to run Ice Storm Extreme instead.
Welll i might be a Driver issue
Top Card was running at 96C and Bottom running at 87c with fans off and i couldn't force them to 100%
Also noted though the benchmark my cards weren't under full load 70% was the max and it sat between 40 - 60%
Post your 3dmark 99 scores here!
I think we need 99 scores as older machines and cards that have difficulty with 2001.
If you need to download it 3dmark99 is still on Futuremarks legacy page for download.
Supported Features:
16-bit Rendering
Point Sampling
Point Sampling With Mip-Mapping
Bilinear Filtering
Bilinear Filtering With Mip-Mapping
Trilinear Filtering
Specular Gouraud Shading
Vertex Fox
Table Fog
W-Fog
Sub-Pixel Accuracy
Alpha Blending
Addivitive Alpha Blending
Multiplicative Alpha Blending
Vertex Alpha Blending
Vertex And Texture Alpha Blending
I was just playing around with 3d mark 99 max for the first time yesterday. I was comparing the tnt2 ultra and my voodoo 3. I don't have the whole thing but I did write down the final scores if that's of interest
maybe if I get bored later i'll pull out the rig and take screenshots and give all the juicy details. it should be saved on there. I tried testing my Matrox G200 and G250 but they crashed the system every time I started the benchmark with them.
Thats great, the more scores the better!
Just watch out for the V-sync issue 3dmark99 has on faster systems. If the first 2 tests aren't going above 60fps or get stuck at 15\30\45 its probably stuck on.
Making a profile for 3dmark 99 atleast for nvidia drivers with it forced off seems to keep it off.
On Windows 2000 it gives _except_handler4_common could not located in the dynamic link library msvcrt.dll
If I copy ddraw.dll from C:\Windows\System on Win2k to the 3dmark folder it gives:
The procedure entry point FT_Thunk could not be located in the dynamic link library KERNEL32.dll
A score of 1 ? Yea thats low.
Atleast it runs on a 486, but did that Virge display anything correctly? Last time I tried a Virge in 3dmark it pretty much rendered everything in monochrome with no textures.
I tried 3dmark 99 in XP on that Tualatin machine above and got the same errors you were in 2k. OS issue for sure.
To get it working, extract the first setup file, as it will give you are -113 install error on Windows XP. Then run the internal setup.exe in Windows 98/ME comp mode.
After that, when you try to launch the installed 3DMark 99 you will get an directx 6.1 error and then you need to inject this file into the 3DMark 99 installation folder, i.e c:\program files\MadOnion.com\3DMark 99 Max\
Nice scores!
I'm trying the XP fix, lets it works in Windows 8.1 64, but framerate gets locked to 60, No amount of forcing it off in the Catalyst Control panel is unlocking v-sync. Even D3d Overrider is not unlocking it ?
Gonna Try it on an actual XP machine next ?.