Mac OS X 10.5 Leopard Install DVD Full Iso Image
Kian Trip
How can I achieve this from either macOS Catalina or Windows 10? I can't seem to find a guide online. I've downloaded Mac OS X Snow Leopard Install DVD from the Internet Archive. Keep in mind that this is an .iso file, not .dmg.
Below are three methods. The first method, which involves the Disk Utility application, failed to work when tested using macOS Catalina 10.15.7 on an iMac (21.5-inch, Late 2013) 2.9 GHz Quad-Core Intel Core i5. User John Mark Harrell's answer confirms this is also true when using Big Sur on an unspecified Mac. So the OP should probably try the second method involving the use of the dd command or the third method involving Balena Etcher.
This was tested using an iMac (21.5-inch, Mid 2011) 2.5 GHz Intel Core i5 with MacOS High Sierra 10.13.6 installed. The flash drive needs to be at least 8 GB in size. The Snow Leopard ISO file was the same as discussed in this answer, which should be the same ISO you have linked to in your question.
Highlight the name Untitled, then click on the Restore button on the top of the Disk Utility application window. In the popup window, select restore from Mac OS X Install DVD, as shown below. Finally, click on the Restore button in the popup window.
Note: This flashdrive will be using the Apple Partition Map scheme. This differs from the flash drive created using the Disk Utility, which used the Master Boot Record scheme. In other words, there is more than one way to create a USB flash drive installer from a Snow Leopard ISO file.
Enter the commands given below to create the USB flash drive installer. Here, an assumption is made that the ISO file name is snow leopard install.iso and the file resides in your Downloads folder. Also, an assumption is made that the identifier is disk2. If necessary, make the appropriate substitutions.
Enter the command given below to determine if any volumes on the flash drive are mounted. If there are mounted volumes, then use the sudo unmount command to unmount them before proceeding. Here, an assumption is made that the name for the flash drive is sdb. If necessary, make the appropriate substitutions in the rest of the steps.
Enter the command given below to create the USB flash drive installer. Here, an assumption is made that the ISO file name is snow leopard install.iso and the file resides in your Downloads folder. If necessary, make the appropriate substitutions.
Note: Any version of Windows compatible with Balena Etcher should make an appropriate substitution for Windows 10. User John Mark Harrell has also posted an answer verifying macOS Big Sur can be substituted.
I couldn't find a method that worked as Disk Utility doesn't cooperate with OS 10.6 .dmg or .iso files, the instructions above might work on older versions of macOS, but I couldn't get it to work on Big Sur. But then I discovered that the same method I've been using to create bootable linux thumb drives works with the 10.6 .iso AND .dmg (depending on which one you have), and it's way easier and works on any operating system (mac/windows/linux).
Be sure to use a standard installation DVD .dmg or .iso, some of these are copied from the "grey" disk, which means they're attached to a specific machine and won't allow you to install even though you can still boot into it successfully.
As another user noted, the Balena Etcher method works great on a Mac. On my 2021 MacBook Pro (with M1 Pro chip), I created a bootable OS X Snow Leopard USB drive using a .DMG of Snow Leopard I downloaded on the internet. And then installed Snow Leopard on a 2009 MacBook Pro without a hiccup.
I had my hands on mac for the first time. All I wanted was to get my hands dirty with macOS. While I was waiting for some response to my question, I was also downloading iso that is 7.83 gb from archive.org. I completed the download, but now may be need to find Dual Layer DVD to create a bootable disk out of this iso. I will give it a try to create a bootable usb out of this to install OS on this wonderfully crafted machine.
Nevertheless, Information you shared is really helpful for someone like me - who was hoping give purpose to old enough Power Mac. If my attempt to get this machine run on macOS X leopard fails, I will just archive (in my attic) this heavy aluminum box, or recycle it.
Hello, I have been trying to install the AR0821C-GMSL2 camera module from Leopard Imaging on my Jetson Nano and I am so far failing. I am getting green output even i have the L4T R32.6.1 (Jetpack 4.6) installed to my jetson. Is there an up-to-date, step by step guide on how to do it?
I am using Jetson Nano Development kit and here is the picture that you asked. I bought this camera kit and connecting it to jetson via usb as you can see in the picture. I have Jetson Orin Nx 16gb, is drivers available for it? If no, then custom drivers for both nano and orin nx would be great.
photo_2023-10-19_00-15-189601280 194 KB
@yussuf.shakhin
I see. You are using the USB3.0 tester instead of connecting Jetson Nano through Deserailizer + MIPI interface.
As I know, the image data from USB camera cannot work with Jetson ISP directly. (@JerryChang Please correct me if I am wrong).
I have a friend with a 2011 MacBook Pro. The idea is to clone a freshly installed SL onto the Mini. The two Macs seem to be identical, but I'm afraid that there is something that I'm overlooking. Any ideas or observations regarding this idea?
I have had the chance to see it myself, including some testing. The Mac Mini was the 2,3 GHz i5. To cut it short: The system was slow, flickering monitor, the cursor (and the entire system) was freezing occasionally, and only HDMI was working.
The Mini was booted from an external USB drive. The system was installed on a MBP 2011/Thunderbolt, from the original installer. The same problems occured as SL was installed on a MBP 2007 - from a retail DVD to the USB drive, and updated to 10.6.8. System profiler has recognized all hardware in both cases.
Having written this and noticing the silence in this thread, I would like to add, that I really don't want to discourage anybody trying this. I think, more has to happen, than my (and other's) naive efforts to get SL on this Mac Mini. Eventually, a hack will come out, or a system update will remedy the problems. I will keep my eyes open. As it stands, I assume it is o.k. to mark the question as answered (written one month later).
The general online consensus is that installing Snow Leopard an a 2011 Mini is NOT possible. The problem is apparently the 2011 Mini's new chip expectations of a fully 64-bit compliant system environment, the loss of necessary drivers that are part of Lion (for example, for the 2011 Mini's graphics processing and/or the Radeon GPU) that don't exist in Snow Leopard or in previous Minis, and other little sabotages that are improvements.
The reason why I am asking at ifixit is because maybe someone here knows how the Mini essentially differs in hardware from the "iMac early 2011" or the "MacBook Pro early 2011" (both running SL originally).
These Macs and the Mini have at least this in common: Intel Core i5 processor, Thunderbolt, Intel HD Graphics 3000, 1333 MHz DDR3 SDRAM. The high end models have different Radeon graphics or different RAM, though. And here's a link to a German website where someone has successfully booted his Mini from a MBP in target mode: =467938
You can install Snow Leopard on any Mac Mini with a Intel CPU. I'm not certain your preferred method of installation will work unless a retail copy of the OS was used on the MacBook Pro. Apple tends to be fussy that way. You can give it a try but no guarantees. With the cost of a Retail copy of Snow Leopard at $29 I would buy a copy and have it available for future needs. My .02--YMMV
Are you sure it works with a retail SL on this Mac? The new Mini comes with Lion. Based on the experience that usually only OSes upwards from the original system can be installed, I doubt that a regular installer DVD would work. Besides, the 2011 Mini does not even have a DVD drive.
Checking my references I find I cannot confirm 10.6 will run in that computer. I think it will but at this point I can only suggest you may want to consider the 2010 version since you want/need 10.6 and Rosetta. If you should decide later you could upgrade to 10.7. If you need/want the new bells and whistles you probably will have to buy the unit and try to load 10.6 on it. Perhaps someone has tried this and can enlighten both of us. If you do go with the 2011 please let us know how it turns out. Good luck.
Thank you for posting this. I indeed have some questions. Can you please keep us posted if you see any behaviour that's not normal? (Another report came from "saugust", who has experienced graphical glitches after a while - he has apparently used a different system build than yours.) Do you plan to upgrade your RAM or your harddrive? I know Thunderbolt hardware is rare, but if you have any chance to try it, a report would be very welcome. Can you do some benchmark tests? I'd be curious how the Mini's score in geekbench is. A free version can be downloaded here:
When the Mac Mini goes into sleep and returns (wake up) then my LCD (attached over the supplied HDMI2DVI adapter does not show a signal (stays dark and says "no signal"). If I power cycle the LCD then the picture comes back. Well for me not such a problem but no way to explain this to a coworker (me IT). And a no go to configure it as "never go to sleep" as this is not green at all.
Well I attached back the HDMI2DVI and another LCD and I discovered that it sees two monitors next to each other (both the same make as it is the single one attached). And the main screen is the one attached to HDMI. So if I would attach the Apple to the TB port.... Wrong: it still stays dark.
So i went back to the internal harddisk with Lion and voila: everthing works fine. The single Apple 24" is discovered on the TB port, the single HDMI2DVI LCD is discovered as a single screen and when both are attached the both work...
7025e2c3df