stripped screw advice (Bambu P1S)

230 views
Skip to first unread message

C Mytko

unread,
Jan 31, 2024, 10:32:07 PM1/31/24
to K-12 Fab Labs and Makerspaces
Hi all - 

I thought someone might have some good advice for me. As you know there are two camps -- you either let kids do maintenance / repairs on 3D printers, or you don't. I think the agency and ownership is valuable.... and, sometimes they do things like not tell me when they are having trouble removing a screw. 

Our Bambu 3D printer was humming along nicely, until it wasn't. Some fairly 3D competent kids went to troubleshoot, and stripped the screws as shown. Any tips? I've tried a rubber band. I've used screw extractors on wood, but never on a screw this small, nor on a machine this expensive. 

All ideas and tips appreciated. 

bambu screws.jpg

hele...@isomers.com

unread,
Jan 31, 2024, 10:33:45 PM1/31/24
to C Mytko, K-12 Fab Labs and Makerspaces
I've used pliers to slowly turn and remove screw. Good luck!

--
For a compilation of resources/links/etc mentioned on this forum, visit: https://sites.google.com/site/k12makers/
---
You received this message because you are subscribed to the Google Groups "K-12 Fab Labs and Makerspaces" group.
To unsubscribe from this group and stop receiving emails from it, send an email to k-12-fablabs...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/k-12-fablabs/CAKPB%3DO8pGdy%2Bi%3DAW5651YDkQ4ROcagAAjE_A5CEYrR2HsZMSOw%40mail.gmail.com.

Sarah Murphy

unread,
Feb 1, 2024, 2:30:51 PM2/1/24
to K-12 Fab Labs and Makerspaces
Not sure it would work on a really small screw, but drilling out the screw is a technique my partner uses on his motorbike.

Jaymes Dec

unread,
Feb 1, 2024, 4:14:33 PM2/1/24
to Sarah Murphy, K-12 Fab Labs and Makerspaces

Email disclaimer

This message (including attachment if any) is confidential and may be privileged. If you have received this message by mistake please notify the sender by return e-mail and delete this message from your system. Any unauthorized use or dissemination of this message in whole or in part is strictly prohibited. 

--
For a compilation of resources/links/etc mentioned on this forum, visit: https://sites.google.com/site/k12makers/
---
You received this message because you are subscribed to the Google Groups "K-12 Fab Labs and Makerspaces" group.
To unsubscribe from this group and stop receiving emails from it, send an email to k-12-fablabs...@googlegroups.com.


--
Jaymes Dec
++++++++++++++++++++++++++++++++++++               
What did you make today?
---------------------------------------------------------------

Michael Tempel

unread,
Feb 2, 2024, 9:10:02 AM2/2/24
to K-12 Fab Labs and Makerspaces
You could try cutting a new slot in the head of the screw. This can be done with a hacksaw, but from your photo, it looks like there isn't much room to get a blade into position. An alternative is a rotary cutting like a dremel.
dremmel.png

Tim Cooper

unread,
Feb 4, 2024, 8:24:53 PM2/4/24
to C Mytko, K-12 Fab Labs and Makerspaces
In Canada, we would jam the largest robertson screwdriver (square head) we could fit in there and nudge them out slowly but firmly. This works well on hex screws like that. You could probably get a set from Amazon or Amazon.ca. This is assuming you have replacement screws.

Best,
Tim Cooper

--
For a compilation of resources/links/etc mentioned on this forum, visit: https://sites.google.com/site/k12makers/
---
You received this message because you are subscribed to the Google Groups "K-12 Fab Labs and Makerspaces" group.
To unsubscribe from this group and stop receiving emails from it, send an email to k-12-fablabs...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/k-12-fablabs/CAKPB%3DO8pGdy%2Bi%3DAW5651YDkQ4ROcagAAjE_A5CEYrR2HsZMSOw%40mail.gmail.com.


--

Tim Cooper, M.Ed OCT (he/him)

Technology Teaching and Learning Coordinator, Design and Programming Teacher

Design Dept Co-Chair | THE YORK SCHOOL

416.926.1325 ext. 1458

E - tco...@yorkschool.com -- T - @tcoops -- LinkedIn - ca.linkedin.com/in/tcoops



To access The York School's Continuity of Learning Plan, please click here.


The York School's mission is to develop inquiring, knowledgeable and caring young people who are engaged citizens of the world. 

Disclaimer: This email is for the use of the named individual or entity and may contain confidential and privileged information.  Views and opinions expressed reflect those of the author and not The York School.

Please consider the environment before printing this email.

Marcus L. Twyford

unread,
Feb 5, 2024, 3:28:45 PM2/5/24
to C Mytko, K-12 Fab Labs and Makerspaces
Harbor Freight sells some fairly inexpensive screw extractors...or try a Torx but as the edges may grab better.



Jennifer Sabados

unread,
Feb 6, 2024, 10:32:32 AM2/6/24
to K-12 Fab Labs and Makerspaces
Hello all,

I have a handful of student projects that need some help with electronic elements including some programming. I know basic schematics, but it's a whole new world out there with companies like Sparkfun. I would love to hope on a zoom with someone that might have the patience to walk me through next steps for my middle school students and get me pointed in the right direction to learning more in depth applications for the future.  

My apologies ahead of itme for my ignorance and thank you in advance for your time.
Jenny

Message has been deleted

C Mytko

unread,
Dec 21, 2024, 6:22:35 PM12/21/24
to k-12-f...@googlegroups.com
Good morning! And to those of us who are K-12 teachers in the US, congratulations on making it to winter break!

Anyway, it looks like our Bambu P1S screw is stripped again. I love this printer, my only frustration is that these two soft screws are the gatekeeper to all repairs within! The last time this happened, we tried jamming in a larger screwdriver, using a rubber band, and even some fancy screw extracting pliers from Japan. What finally worked was that someone with a smaller cutting wheel than I came and cut a slit so that we could remove it with a flathead screwdriver.

I don’t have access to that person or tool anymore, any ideas on what that may have been? Do I just get a tiny cutting wheel for the Dremel?

Additionally, does anyone have any insight for me to prevent this in the future? I know Bambu sells extra screws for the A1 mini, but I’m not even sure what the screws in the front of the P1S. I can keep working on improving the sloppy work of my middle school maintenance crew, but in the meantime, is it possible to just get the same screws made of a stronger material?

Christine

IMG_2925.jpeg

Michael Tempel

unread,
Dec 22, 2024, 9:32:08 AM12/22/24
to K-12 Fab Labs and Makerspaces
 a cutting wheel for the Dremel is perfect.

Tim Cooper

unread,
Jan 6, 2025, 12:03:31 PM1/6/25
to Michael Tempel, K-12 Fab Labs and Makerspaces
I live in Canada, birthplace of the Robinson screw type. It is a square head (like hex but two less sides). It is really good at jamming into a striped hex. You can get them a t most hardware stores and amazon, Get an assortment and jam in the biggest one that fits. Once they are out you can figure out the replacements.

Best,
Tim Cooper

--
For a compilation of resources/links/etc mentioned on this forum, visit: https://sites.google.com/site/k12makers/
---
You received this message because you are subscribed to the Google Groups "K-12 Fab Labs and Makerspaces" group.
To unsubscribe from this group and stop receiving emails from it, send an email to k-12-fablabs...@googlegroups.com.
Reply all
Reply to author
Forward
0 new messages