Adjustable Height Tables

41 views
Skip to first unread message

Jeri Countryman

unread,
Sep 22, 2025, 2:37:43 PM (9 days ago) Sep 22
to k-12-f...@googlegroups.com
I am looking to purchase tables for our K-8 maker space. I’ve used FormaSpace tables in the past and they’ve held up wonderfully but they were only for middle school students so they were a fixed height. Now that we are designing a space for K-8, I am looking at adjustable height tables. FormaSpace has a version and I’m wondering if anybody has experience with them.  

Also, what is the ideal height for a K/1 student maker table? In the classroom, their tables are 24 inches high, but they are sitting at them. I imagine that they will be standing when working at the maker space tables. 

Thanks!

Mark Loundy

unread,
Sep 22, 2025, 3:16:21 PM (9 days ago) Sep 22
to Jeri Countryman, k-12-f...@googlegroups.com
Jeri,

We built ours. K-5 mostly sit on standard metal lab stools.
https://k5create.blogspot.com/p/assembling-create.html

Mark Loundy (He, Him, His)

Instructional Technology Specialist
Google Certified Educator
Ignited Fellow x 5
Silicon Valley

--
You received this message because you are subscribed to the Google Groups "K-12 Fab Labs and Makerspaces" group.
To unsubscribe from this group and stop receiving emails from it, send an email to k-12-fablabs...@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/k-12-fablabs/CAHvocpQw1zm2xyo9zwty5fJoeLT7H6E3yST%3DFVyM7HgyJXHb4w%40mail.gmail.com.

Paul Meinersmann

unread,
Sep 22, 2025, 3:23:13 PM (9 days ago) Sep 22
to Jeri Countryman, k-12-f...@googlegroups.com
We just opened a brand new PreK-Adult makerspace and wrestled with this for a long time.  We looked at tables that would fold up for easy storage, at tables with a crank to adjust the height, plug in with power to adjust the height, etc.  In the end, we went with fixed height Smith Systems butcher block tables in the 29" height.  These are the same basic height as what was in the art room of our PreK-8 school.  In one room we went with a mix of 29" and 36", but the littles will probably work less in that space.  These tables have room for 6 to sit/stand around them and are durable enough to hold up to anything we are likely to throw at them.  We had a parent helping assemble them and he was very impressed with the quality (and he's a home and wooden boat builder).

Side note - I like the idea of building them (see Mark's email), but at the time we had more money than time and we had some stakeholders that wanted things to look polished!

Thank you,
Paul

Paul Meinersmann

Technology & Makerspace Director

St. George Municipal School Unit

65 Main St, PO BOX 153

Tenants Harbor, ME 04860

mobile: 207-975-3043

school: 207-372-6312

Pronouns: he/him/his



Pete Carlson

unread,
Sep 22, 2025, 3:24:53 PM (9 days ago) Sep 22
to Mark Loundy, Jeri Countryman, k-12-f...@googlegroups.com
Like Jeri, we also have built some of ours. But we also use Husky Adjustable work tables in our K-8 makerspace. They are adjustable, durable, affordable and come in a couple lengths. They adjust low enough for Kinder seating to high enough for an adult standing work station. 


Pete Carlson (he/him)

Innovation Lab Director / Outdoor Education Coordinator

Instagram: @2ndstorymaker


 (626) 795-9315 ext222  

        


Chandler School 1005 Armada Dr, Pasadena, CA 91103

Caring, Challenging, Committed







Brian Louie

unread,
Sep 22, 2025, 3:27:52 PM (9 days ago) Sep 22
to Jeri Countryman, k-12-f...@googlegroups.com
Hi Jeri. Home Depot has 46", 52" 62" and 72" wide tables and can be height adjusted between 30"-42" 

I built out storage for underneath the tables to maximize the space.


--
You received this message because you are subscribed to the Google Groups "K-12 Fab Labs and Makerspaces" group.
To unsubscribe from this group and stop receiving emails from it, send an email to k-12-fablabs...@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/k-12-fablabs/CAHvocpQw1zm2xyo9zwty5fJoeLT7H6E3yST%3DFVyM7HgyJXHb4w%40mail.gmail.com.


--
Brian Louie, P'23 '28
K-8 Maker and Design Educator
Grade 5 Player Development Coach
Grade 6 Volleyball & Basketball Coach
Varsity Volleyball Coach
5-8 ALANA Coordinator



********************************************************************

CONFIDENTIAL: The Hamlin School This email and attachments are sent

by The Hamlin School and may contain information that is privileged

or confidential. If you are not the intended recipient, please

delete the email and any attachments without reading, printing,

copying, or forwarding it, and please notify us. help...@hamlin.org

********************************************************************

Lee Jones

unread,
Sep 22, 2025, 3:38:16 PM (9 days ago) Sep 22
to Jeri Countryman, k-12-f...@googlegroups.com
If you are okay with building some, I made these for my PreK-5 Makerspace. They were easy [enough] to assemble, had a lot of the stuff students needed, and I color coded them (this is the "green" table below) for easy stationing. I also built them square and equal height so I could push them around to make bigger groups. 
image.png

They were all ~28 inches tall and 35x35". I had planned to add risers to make the height adjustable for the variety of sizes, but this height was actually perfect, even for me. 

I have CAD drawings of the tables I can share, if you want to go this route.

Sincerely, 
Lee Jones
Emporia State University



Payton Norris

unread,
Sep 23, 2025, 7:38:45 AM (9 days ago) Sep 23
to K-12 Fab Labs and Makerspaces
In our lab, we use the Seville Classics Ultra HD adjustable tables. They work pretty well and we have found them to be stable enough for daily use. They are a bit cheaper than some other brands I've seen. I do find it annoying how skinny they are at times though.

Reply all
Reply to author
Forward
0 new messages