[j-nsp] MPC-3D-16XGE-SFPP on MX960

[Michael Phung]

Hey Guys,

We just tired installing a MPC-3D-16XGE-SFPP on a MX960 running
10.0R2.10 on slot 0 and got a error "FPC 0 misconfigured". After this
message, any attempt to "online" the FPC just fails with the same
message again. The output of "show chassis fpc" shows the following;

Temp CPU Utilization (%) Memory Utilization (%)
Slot State (C) Total Interrupt DRAM (MB) Heap Buffer
0 Offline ---FPC misconfiguration---
1 Online 28 12 0 1024 23 33


Anyone else encounter this problem before? This is occurring on 2
separate cards on different routers, so I don't think the cards are
faulty.

Any help would be greatly appreciated!

Thanks,

Michael
_______________________________________________
juniper-nsp mailing list junip...@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp

--
You received this message because you are subscribed to the Google Groups "juniper-nsp" group.
To post to this group, send email to junipe...@googlegroups.com.
To unsubscribe from this group, send email to juniper-nsp-...@googlegroups.com.
For more options, visit this group at http://groups.google.com/group/juniper-nsp-?hl=en.

[Sean Clarke]

Hi Michael

You cannot mix MPC and DPC in the same chassis before 10.2, so you'll
need either to upgrade to 10.2 (which is in beta) or remove the DPC in
slot 1

You *should* also have upgraded the fan trays

cheers
Sean

[Richard A Steenbergen]

On Tue, May 04, 2010 at 02:25:16AM -0400, Michael Phung wrote:
> Hey Guys,
>
> We just tired installing a MPC-3D-16XGE-SFPP on a MX960 running
> 10.0R2.10 on slot 0 and got a error "FPC 0 misconfigured". After this
> message, any attempt to "online" the FPC just fails with the same
> message again. The output of "show chassis fpc" shows the following;
>
> Temp CPU Utilization (%) Memory Utilization (%)
> Slot State (C) Total Interrupt DRAM (MB) Heap Buffer
> 0 Offline ---FPC misconfiguration---
> 1 Online 28 12 0 1024 23 33
>
>
> Anyone else encounter this problem before? This is occurring on 2
> separate cards on different routers, so I don't think the cards are
> faulty.

Is the other card in the chassis a trio card as well? You can't mix trio
and non-trio cards until 10.2, and you can't run the MPC/MIC cards until
10.1.

--
Richard A Steenbergen <r...@e-gerbil.net> http://www.e-gerbil.net/ras
GPG Key ID: 0xF8B12CBC (7535 7F59 8204 ED1F CC1C 53AF 4C41 5ECA F8B1 2CBC)

[Michael Phung]

Ahh now that makes sense. Yes the other card is a DPC card.

In order to correct this, I'll have to migrate our connections the MPC
card. Do you know if a reload is required or can I just pull the DPCs
and online the MPC?

Thanks,

Michael