Invalid sourceaddress error

[Anoop]

While trying to send an SMS to a real SMSC,
i am getting the following exception

org.jsmpp.extra.NegativeResponseException: Negative response 0000000a
found

Can any one help me how to solve this?

Best Regards,
Anoop

[Amin Abbaspour]

Hi,

Have a look at SMPP 3.4 Ref p. 112.

ESME_RINVSRCADR | 0x0000000A | Invalid Source Address

Regards,
Amin

[Amin Abbaspour]

Hi again,

Be sure that TON match Source Address. For example you may set TON to
Alphanumeric and send from an International number or vise versa.
There are also some limitations for each TON type's address length.
Some centers ignore these issues but some of them apply strict rules.

Regards,
Amin

[Anoop]

I am trying to send SMS from an UNIX machine to a mobile.
So,Should the Source address in the PDU be the ipaddress of my UNIX
machine

On May 18, 6:53 pm, Amin Abbaspour <a.abbasp...@gmail.com> wrote:
> Hi again,
>
> Be sure that TON match Source Address. For example you may set TON to
> Alphanumeric and send from an International number or vise versa.
> There are also some limitations for each TON type's address length.
> Some centers ignore these issues but some of them apply strict rules.
>
> Regards,
> Amin
>
>
>
> On Mon, May 18, 2009 at 6:20 PM, Amin Abbaspour <a.abbasp...@gmail.com> wrote:
> > Hi,
>
> > Have a look at SMPP 3.4 Ref p. 112.
>
> > ESME_RINVSRCADR | 0x0000000A | Invalid Source Address
>
> > Regards,
> > Amin
>

> > On Mon, May 18, 2009 at 6:08 PM, Anoop <anoop.s...@gmail.com> wrote:
>
> >> While trying to send an SMS to a real SMSC,
> >> i am getting the following exception
>
> >> org.jsmpp.extra.NegativeResponseException: Negative response 0000000a
> >> found
>
> >> Can any one help me how to solve this?
>
> >> Best Regards,

> >> Anoop- Hide quoted text -
>
> - Show quoted text -

[Amin Abbaspour]

This is not a must. you may ask from the SMS Center operators which
TON/NPI/Address types they support. Maybe there is a range dedicated
to your account and hence you should set sender address to numbers
limited to that range.

If account does not have any specific range, try with simple dst
addresses then then switch to IP based NPI.

Amin

[Anoop]

Thanks,
Amin

But the SMSC has a dedicated connection to my testBed(machine)
I have provided the submit PDU with sourceaddress field as
address of my machine(aa.bb.cc.dd format)

But then also this error comes.
What may be the reason?

> >> - Show quoted text -- Hide quoted text -

[Abdelmoula El Ousfour]

if you put TON/NPI=5/0 so make sure that the alphanumerical address doesn't exceed 11 characters

you can put TON/NPI=1/1 and the adress is for exampl a four/five digit umber or the MS ISDN in international format without 00 or +

if you are connected to some SMPP gateways (SMSC,...0 in the operator side they may specify the TON/NPI or control the source address that you are allowed to use so just ask about it

Abdel

[Anoop]

Basically,i want to know whether my message has being delivered to the
destination,
So i m requesting for a delivery reciept.
For delivery receipt to reach my server, i should give the ipaddress
of my server in the source address range.
my server ip is having 12 characters.
In that case, How shall i resolve this situation

Best Regards,
Anoop

On May 19, 10:16 am, Abdelmoula El Ousfour <aelousf...@gmail.com>
wrote:

[Abdelmoula El Ousfour]

the SMSC doesn't route the response back(in this case your delivery report) based on what you have as source address in your submit_sm but based on your short code number which is determinate from the SMSC basically by a unique combinition of your system_id and system_type .

so you can put what ever you want in source address when submitting your SMS to the SMSC will send you the notification accrdinaly.

Regards
Abdel

[Anoop]

Thanks very much,

It was a great information.

Regards,
Anoop

On May 20, 11:40 am, Abdelmoula El Ousfour <aelousf...@gmail.com>
wrote: