You do not have permission to delete messages in this group
Copy link
Report message
Show original message
Either email addresses are anonymous for this group or you need the view member email addresses permission to view the original message
to jscut
I sketch 3 holes in a graphic program in metric. I imported into inkscape all metric settings. I brought .svg file into jscut with all metric settings. I created the gcode and saved it. I looked at the output and the math worked out to what I wanted for size and spacing. I cut the 3 holes and the are about 5mm instead of 6.35 and the spacing is less than I wanted by about a 1/3. Anything i'm missing?
Thanks in advance
Fred4toes
Darin Cola
unread,
Mar 9, 2021, 2:04:21 PM3/9/21
Reply to author
Sign in to reply to author
Forward
Sign in to forward
Delete
You do not have permission to delete messages in this group
Copy link
Report message
Show original message
Either email addresses are anonymous for this group or you need the view member email addresses permission to view the original message
to jscut
Are you saying you looked at the output (the gcode) and it worked out? Then obviously not a problem with jscut, must be your cnc settings. If you want to post your svg and gcode I'd look at it.