JPOS Openway - Way4 implementation

[Tung Mai Vu]

Hi All,
we are payment processor and using Way4 - an OpenWay product - to
connect to banks.
We want to extend our channel to mobile, IVR, internet and now looking
for multi-channel gateway like ISO/Bridge.
I'm wandering if ISO/Bridge can work with Way4, any help?
thanks in advance.
Tung Vu

[Mark Salter]

Tung Mai Vu wrote:
> we are payment processor and using Way4 - an OpenWay product - to
> connect to banks.
> We want to extend our channel to mobile, IVR, internet and now looking
> for multi-channel gateway like ISO/Bridge.
> I'm wandering if ISO/Bridge can work with Way4, any help?

way4 talks TCP/IP, supports the usual scheme interfaces (ISO8583), xml
and others.
jPOS talks TCP/IP, supports the usual scheme interfaces (ISO8583), xml
and others.

ISO/Bridge is jPOS, and thus will be able to connect to way4, if that is
what you need.

Are you looking for an xml to other format conversion?

What is it you need to achieve, in terms of protocol conversion or
bridging (from what to what)?

--
Mark

[Tung Mai Vu]

Thx a lot for your help.
this is our situation:
we are startup payment processor in vietnam, pls note that Vietnam is
still very much cash society
we invested in Way4 system and connected to 7 banks (more connections
coming up at the end of this year), we got POS network to distributed
prepaid cards, e-vouchers anf allow ATM card top up.
now we're looking for new channel and product like:
- introducing e-wallet
- e-POS( or POS on PC): this is to incease unmber of POS as well as
reducing the investment (per POS)
- internet payment gateway: allow e-commerce site to do transaction
via our network.
- SMS micro-payment : (card not present)
so this is what I want.
from my understanding this is what we need to do
- enable a host to host connection from Way4 that dedicated for ISO/
Bridge.
- implement ISO/bridge and connect it to Way4.
- develope new channel to interact with ISO/Bridge
honestly I'm not quite familiar with both JPOS and Way4 so this is my
questions:
- possibility of conectivity between ISO/Bridge and Way4 ( of course
I will check with Openway, but others advice are more than welcome)
- how can we do the PIN verification if card present and card not
present?

Thanks al lot and best regards,
Tung Vu

[Mark Salter]

Tung Mai Vu wrote:

> from my understanding this is what we need to do
> - enable a host to host connection from Way4 that dedicated for ISO/
> Bridge.

This would need you to decide which message structure you want to talk
to way4 under. This could be Visa or the xml format, but the decision
is yours in conjunction witht the components you already have
purchased with your way4 software.

> - implement ISO/bridge and connect it to Way4.

As above, it will depend on the message format chosen.

> - develope new channel to interact with ISO/Bridge

Usually (someone will jump in if I am incorrect) the format to talk to
the ISO/Bridge is xml, but it doesn't have to be.

> honestly I'm not quite familiar with both JPOS and Way4 so this is my
> questions:
> - possibility of conectivity between ISO/Bridge and Way4 ( of course
> I will check with Openway, but others advice are more than welcome)

You will need to pick a common message structure between the two
products.

> - how can we do the PIN verification if card present and card not
> present?

PIN verification is conducted by the Issuer, are you the Issuer or are
you simply the switch or gateway to the actual Issuer. You might need
to implement PIN block translation between zone keys. For this you
will need a secure devise (HSM) for secure key handling.

--
Mark

[truongt...@gmail.com]

Hi Tùng
Could you help me to solve some major on Way4 System?
Pls sms me at 0934 188989 or skype on nam.truongthanh
Thanks!
Nam

[Hoàng Anh Vũ]

JPOS and way4 can connect and send msg together use TCP connection.

--
--
jPOS is licensed under AGPL - free for community usage for your open-source project. Licenses are also available for commercial usage.
Please support jPOS, contact: sa...@jpos.org
 
You received this message because you are subscribed to the "jPOS Users" group.
Please see http://jpos.org/wiki/JPOS_Mailing_List_Readme_first
To post to this group, send email to jpos-...@googlegroups.com
To unsubscribe, send email to jpos-users+...@googlegroups.com
For more options, visit this group at http://groups.google.com/group/jpos-users
 
---
You received this message because you are subscribed to the Google Groups "jPOS Users" group.
To unsubscribe from this group and stop receiving emails from it, send an email to jpos-users+...@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.
 
 

[Zablon Ochomo]

Hi Vu,

ISO/Bridge can work with Way4. You just need the correct channel and packager.

I have worked on Way4 many times on host-to-host connections and other external APIs but not POS/ATM.

jPOS can provide the bridge that we can contribute on the channel and packager customizations.

[Mark Salter]

On 28/05/2013 10:01, Zablon Ochomo wrote:
>
> You just need the correct channel and packager.

... and of course the correct license that is applicable and relevant to
your needs and use.

See http://jpos.org for details

--
Mark