jPOS Users

>However, is there any way I can process the request without appending the length as the client

A peer disconnect means the other end shut the connection down. Usually happens when the message you

As Igor said, those are all good options, but if you care to read the doc, go to section 5.2 and you

You can just set the header in the response before sending it. Something like this: response.

Yes, I'm aware of several high load sites running jPOS 3, actually 3.0.1 (latest SNAPSHOT) on

Is the timeout parameter at point 6 the same as max idle? You have a custom channel adaptor, so we

See https://jpos.org/docs/tutorial/qbean/configuration#environments -- @apr On Wed, Sep 3, 2025 at 3:

The channel is unable to connect or reconnect after a disconnect has happened. https://github.com/

Please simply ensure that these numeric fields are full of numeric digits and not spaces- i would

What's being logged seems to be the license for jPOS CE and not the commercial version. If you

Hi Chhil, Thanks a lot for the response. We have reached out to ACI and will possibly reach out to

In db.properties you need to put: In cfg/db.properties you can use something like this: hibernate.

Its our own system, we use jpos as a client, I have added connect-timeout to 5sec and updates timeout

Apologies for the earlier confusion, what I mentioned was incorrect. <property name="

Can you share what are you doing where you need that? Share the code where you need it disabled

Déjà vu ! I am sure we have have travelled those loop before. Sorry for the noise from me -- Mark ---

Alternatively, see if they can send you a network message. Collect and analyze the dump, and you can

If your switch is ISO 8583 based then any jpos based product can be integrated with it. China based

Please refer to the spec for Mastercard and start to match your Packager to it. For a commercial

Understood, thanks for the update. On Sun, 22 Jun 2025, 21:45 chhil, <chi...@gmail.com> wrote:

Are your system properties being intialized before the jpos call? Probably not and its using the

First, I have marked this subject at Off Topic (OT), since it isn't really a jPOS question. On 09

Why don't you use GLSession's createCompositeAccount or createFinalAccount ? -- @apr

That feature has been there for a loong time, started in 1.9.1 with an '*' but it was too OS/

Problem with the scan is that once connected, if you use ALL, QServer might think the scan client is

Simple test that works. Make sure you set the include-header-length as a string "true".

We use de34 with the 1500 limit. If you don't pack the subfields correctly you will cross the

Just in case it helps, here is the JBang script I use to debug packagers: https://gist.github.com/ar/

Perhaps finding a forum about that technology, and not this one, which is for an alternative

I cannot help you with your schema as its something you will need to determine using the Thales spec.

For visa we use the jpos vapchannel that handles the visa header. Are you using the vapchannel? If

Thanks for the answer. Em seg., 10 de mar. de 2025 às 16:28, Constantino Voulgaris <cv@

Hi Leandro, If this topic is still active, let me try to jump in. When you mention ARPC, I believe