Johnson 18 rudder and tiller

52 views
Skip to first unread message

Mark Beaton

unread,
Sep 18, 2024, 6:44:36 AM9/18/24
to Johnson 18 One Design -2024
Recently acquired a Johnson 18 from a scrapyard in Paterson, NJ! It's missing the rudder assembly and sails. 
I'm a sailmaker so the sails won't be an issue. 
The rudder is the real problem.
. Can someone send me a tracing of the rudder and tiller or direct me to a source? I looked through the forum and see a few solutions that might work but I want to explore all options.
Thanks in advance!

markgri...@gmail.com

unread,
Sep 18, 2024, 7:22:53 AM9/18/24
to Johnson 18 One Design -2024
Congrats on the find. 
When I broke my centerboard a few years ago, I contacted Roger Martin (designer) and he send me the CAD file for it. I then had one fabricated by Competition Composites in Canada. Much better than the original, but expensive. However, if you’re able to fabricate one yourself, that’s where I’d suggest you turn.

Hope you get it in the water. It’s a fun boat to sail.
Best,

alfre...@gmail.com

unread,
Sep 18, 2024, 7:19:59 PM9/18/24
to Johnson 18 One Design -2024
Greetings,
I was on the same boat... ;-}  not long ago. this was my answer, and it has worked out wonderfully.

Customer service, purchasing, and shipping was a breeze.

Tyler Wolf

unread,
Sep 21, 2024, 12:57:11 AM9/21/24
to Johnson 18 One Design -2024
Mark,

Not to hijack this thread but I just split my center board two weekends ago when righting from a turtle… I am in contact with Ross at Rodger Martin Designs who is the current engineer since Rodger has passed. He has been a great help but has thus far not been able to locate any of the original drawings, CAD, calculations, etc… for the center board. If you still have the information you were given lying around it would be a great resource to have as I repair mine. Right now Ross and I are in talks of reverse engineering the board so I can make one with a shear spar in it to avoid this issue in the future. Thanks in advance!

Mark Griffin

unread,
Sep 21, 2024, 7:22:53 AM9/21/24
to johnson-18...@googlegroups.com
Hi Tyler - Perhaps these will help…:)
Johnson18.pdf
<50CBD.DWG>


The second file is legit - it’s the CAD file.


Sent from my iPad

On Sep 20, 2024, at 11:57 PM, Tyler Wolf <tylerw...@gmail.com> wrote:

Mark,
--
-- You received this message because you are subscribed to the Google Groups Johnson 18 One Design -2021 group. To post to this group, send email to johnson-18...@googlegroups.com. To unsubscribe from this group, send email to johnson-18-one-d...@googlegroups.com. For more options, visit this group at https://groups.google.com/d/forum/johnson-18-one-design?hl=en
---
You received this message because you are subscribed to the Google Groups "Johnson 18 One Design -2024" group.
To unsubscribe from this group and stop receiving emails from it, send an email to johnson-18-one-d...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/johnson-18-one-design/2a3d7270-a965-4935-8aad-f48369a14f21n%40googlegroups.com.
50CBD.DWG
Johnson18.pdf

MARK BEATON

unread,
Sep 23, 2024, 2:04:42 PM9/23/24
to johnson-18...@googlegroups.com
Hi Alfredo,
Thank you for the link. 
I have a few questions about your new rudder. It looks like a nice product. 
Did the pintles fit onto the gudgeons without any issues?  
My gudgeons have plastic inserts. Do yours?
It looks like the pintles can be adjusted up and down for custom spacing. Does that work?
Rudder blade angle is adjustable?
Overall length of rudder from tip to top of rudder head on leading edge?
Thanks for your help. 
Mark 

Sent from my iPhone

On Sep 18, 2024, at 7:20 PM, alfre...@gmail.com <alfre...@gmail.com> wrote:


--
-- You received this message because you are subscribed to the Google Groups Johnson 18 One Design -2021 group. To post to this group, send email to johnson-18...@googlegroups.com. To unsubscribe from this group, send email to johnson-18-one-d...@googlegroups.com. For more options, visit this group at https://groups.google.com/d/forum/johnson-18-one-design?hl=en
---
You received this message because you are subscribed to the Google Groups "Johnson 18 One Design -2024" group.
To unsubscribe from this group and stop receiving emails from it, send an email to johnson-18-one-d...@googlegroups.com.

Mark Beaton

unread,
Sep 23, 2024, 2:04:48 PM9/23/24
to Johnson 18 One Design -2024
What is the overall length of the rudder including the rudder head?
Thanks.
Reply all
Reply to author
Forward
0 new messages