Any way for read "eeprom_dump.bin" file without sailfish?

[adrian villalpando jurado]

Hi guys, after a lot of headaches with Geeetech replacement boards (Rev. E and Rev. G), i decided to move my printer to a RepRap type board.

My MightyBoard is not working but i have the dump file on the SD card, is there any way for read the data (Steps/mm, accelerations, etc) for use as starting point for calibrating my new system?

[Daniel Newman]

On 07/02/2018 10:21 AM, adrian villalpando jurado wrote:
> Hi guys, after a lot of headaches with Geeetech replacement boards (Rev. E and Rev. G), i decided to move my printer to a RepRap type board.
> My MightyBoard is not working but i have the dump file on the SD card, is there any way for read the data (Steps/mm, accelerations, etc) for use as starting point for calibrating my new system?

No. But you can use the documented defaults,

http://www.sailfishfirmware.com/doc/parameters.html#x19-620004

Dan

[adrian villalpando jurado]

Thanks, i also found the GPX converter defaults, seems to be the same and complement that info.

https://github.com/markwal/GPX/blob/master/src/shared/std_machines.h