Flojet 3000 Series Diaphragm Pump

[Giordano Thibault]

Introducingour newest line of 12v DC automatic water system pumps. The triplex diaphragm series features models that deliver 2 gpm (7.6 lpm) flow and up to 60 psi (4.2 Bar) of pressure, the 03501-506 does not have the rocker switch, see the 03501-503 if you need a manual on/off switch as well as a pressure switch. Pumps are self-priming and can safely run dry if necessary. Soft noise absorbing mounts reduce annoying background noise while running. Utilizes 3/8" FEMALE bsp threaded inlet and outlet (we supply 2 x 3/8" BSP x 10mm hose tails with each pump) and the built-in pulsation eliminator reduces frequent pressure surges. The following are flows at pressures that we measured in our test area, 5.5 L/min @ 10 psi, 5 L/min @ 20 psi, 4.6 L/min @ 30 psi and, 1.5 L/min @ 40 psi and, the pressure switch shuts the pump off at 60 psi. Suitable for use with many chemicals and agricultural sprays as the diaphragms are Santoprene and the check valves are Viton. This is a good little spray gun supply pump for intermittent use only, please make sure that you match the nozzle on your spray gun or wand to the flow and pressure available. To download the spec sheets and installation instructions, click here. This pump could be used to supply water pressure into a single low flow outlet such as the sink on a caravan or camper trailer, a very small shower with a flow of 5 L/min, a low flow weed spray wand or nozzle or, any small flow rate outlet.

The Duplex II series of pumps incorporate the best technology features developed by Flojet. Everything from the back flow preventer, check valves, bearings and diaphragm assembly to the motor, have been designed to make this truly the most advanced and reliable diaphragm pump available. Higher efficiency of the pump is evident in the longer life of the motor pump unit. The new diaphragm design combined with the new valves makes the pump capable of pulling higher dry vacuum. Duplex II is available in various performance ranges, voltages and with a choice of elastomers, making it easily adaptable to a diverse range of applications.

Features :

Self priming up to 8 feet (2.4 m).

Can run dry without damage.

Chemical resistant material.

Internal bypass standard.

Built-in back flow preventer.

Heavy duty ball bearing drive system.

UL, CSA and CE models available.

Specifications:

Diaphragm Pump Duplex II 115V

3/8" FNPT Ports

1.6GPM

60psi Switch

Polypropylene

EPDM Valves

Santoprene Diaphragm

6' Power Cord

IndustrialZone is a supplier of industrial equipment and parts and is not associated with any of the original equipment manufacturer listed on this website. all other trademarks or registered marks used herein are the property of their respective companies.

3a8082e126