AT^SCFG error

[Louis Ruch]

Hi All,

I am having another strange problem, we are using the EGS5-x module.  I set autostart as follows:

AT^SCFG="Userware/Autostart/Delay","","20"

^SCFG: "Userware/Autostart/Delay","20"

OK

AT^SCFG="Userware/Autostart/AppName","","a:/GSMMini.jad"

^SCFG: "Userware/Autostart/AppName","a:/GSMMini.jad"

OK

AT^SCFG="Userware/Autostart","","1"

^SCFG: "Userware/Autostart","1"

OK

I then restart the board and it does not run automatically.  I am able to get in with the USB and manually run it using :

AT^SJRA="a:/GSMMini.jad"

And the software runs perfectly.

When I tried to figure out what was going on I get:

at^scfg?

^SCFG: "AutoExec","0","0","0","0",""

^SCFG: "AutoExec","0","1","0","0","","000:00:00","000:00:00"

^SCFG: "AutoExec","0","1","1","0","","000:00:00","000:00:00"

^SCFG: "AutoExec","0","1","2","0","","000:00:00","000:00:00"

^SCFG: "Call/ECC","0"

^SCFG: "GPRS/ATS0/withAttach","on"

^SCFG: "GPRS/AutoAttach"

ERROR

The system hangs for about 20 seconds and then shows error.

--
Kind Regards,

Louis C. Ruch
Software Engineer
Cherry Creek

[Ahmed Adnane]

Hello,

I think you have to flash it, maybe there is something wrong with the FW. If it is still under guarantee, I recommend you to return it back to your provider

Good luck

2013/6/26 Louis Ruch <loui...@gmail.com>

--
javacint group - http://www.javacint.com/
---
You received this message because you are subscribed to the Google Groups "Cinterion Java enabled chips support" group.
To unsubscribe from this group and stop receiving emails from it, send an email to javacint+u...@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.
 
 

--
ADNANE Ahmed

[Ruchs]

Hey All,

Seems to be related to the USB for some reason.  If I start the unit up with the USB plugged in I get random Autostarts - sometimes it works sometimes it does not.  However, if I just power the unit with no USB it so far works every time. 

Regards,

Louis