Jasper Support Forum

Since this has been a questions asked repeatedly, I am re-posting an article that someone posted a

bump

It appears your sample rate and chunk may need to be adjusted for the mic you are using. Have you

Alright, so it just means some kind of volume (in an arbitrary unit)... Thank you so much for making

hello everyone. i'm pretty new to this tech so pardon me for this question. does the img provided

Questions: What image are you using? Mine? What audio hardware do you have? Are you using a desktop?

the img has nothing to do with your network. Log in and type 'ifconfig' and it will start

The profile.yml file is found at ~/.jasper/profile.yml Attention to the DOT before the word jasper

I've tried using both a USB Loigtech speaker, and Sennheiser headphones plugged into the audio

no need, just put the key in 'key'

Message me in slack and I will show you how to get around this error.

yeah just pop the key in without quotes. Done.

Yeah, I got that already. The question was if you could help me with the config because I'm

Yes, just clone the repo and set it up. If you have any issues now; it will just be due to config/

NP, feel free to ask if you have questions.

Hi Trevor, Have you tested jessie? Regards, vidhya

Hi, I am getting few errors at running Jasper on Raspberry Pi B+. Please go through the attached

Hey, after I start Jasper I get this message below. Can anybody help me with this problem? Thank you

While running jasper following error occurred, I am new to Linux and Raspberry pi, please help. Error

Am also getting the same error. Please help on this issue asap. pi@raspberrypi:~ $ /home/pi/jasper/

Hi, I've tried to install Jasper on my RPi2 following the official guide. All has gone right but

Thanks a lot.

Get the current image for your Pi from the link on this support forum, not the Jasper Documentation

I used the image provided by Matthew on the link https://groups.google.com/forum/#!msg/jasper-support

This is what worked for me: Grabbed a copy of "Raspbian Jessie Lite" from: https://www.

Thanks Matthew. I joined you. I resolved my problem when I copied my /home/pi.asoundrc writed above

yep On Monday, February 22, 2016 at 7:41:43 PM UTC-5, GK wrote: So all you have plugged in is that

Thanks you so much!! This made it all work for me. On Sunday, February 14, 2016 at 4:44:59 PM UTC+11,

The directory in which you are running the git command already contains a folder named jasper Either

hey, am trying to run pi camera using jasper. Can anyone guide me to do so.. am quite new to pi my

you can just pop the sd card you are using into a laptop and use an img reader/writer, or dd if you