Hi all,
For who is interested an update of Just Another PIC Programmer.
I received the PCB's and assembled one. It seems to work OK. In the attached pictures so see the assembled PCB and in the other picture the programmer in action. On the left is the PIC Programmer to re-program the JAPP for development. On the right you see a device that is going to be programmed via the JAPP and on the top a serial connection. The serial connection is used for debugging but can also be used to enter commands as is done via the USB. I only assembled the Micro-USB-B connection which seems to work fine.
I implemented 5 programming algorithm so far. This should cover a bunch of PICs but that is something I still need to check and I need to speed up some programming algorithms. Once I have done that I could upload all stuff to my GitHub account and continue adding more PICs.
When making the final schematic I though I could leave out some resistors but that was a mistake so I soldered them on the backside of the PCB. So at least one redesign would be needed.
Kind regards,
Rob