PCA9626 library - Status update

[pinhe...@gmail.com]

Hi all,

In a previous discussion, I commited to write a library for the PC9626 chip from NXP.   Here's an update of the status.

I started the work using the library for PCA9685 as a starting point.   In fact, those two chips are so different that there was not much usable for the PCA9626.

So, to make a long story short, I restarted from scratch.

As for now, I consider the library as finished, all procedure and functions are compiling without errors, but it is yet untested with the real hardware.   So, this is version 0.00001 Beta ;-)

I am waiting to receive my PCB designed to test it with a PIC16F1768.

I'll keep you update.

David

[Rob CJ]

Hi David,

If you want you can send the library and sample program to me for review. I can also add it to the bee-package for you.

Good luck finalizing the library.

Kind regards,

Rob

---

Van: jal...@googlegroups.com <jal...@googlegroups.com> namens pinhe...@gmail.com <pinhe...@gmail.com>
Verzonden: vrijdag 2 december 2022 12:38
Aan: jallib <jal...@googlegroups.com>
Onderwerp: [jallib] PCA9626 library - Status update

 

--
You received this message because you are subscribed to the Google Groups "jallib" group.
To unsubscribe from this group and stop receiving emails from it, send an email to jallib+un...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/jallib/7277a1b0-fc39-45f1-8442-2c343092d254n%40googlegroups.com.

[Rob CJ]

Hi David,

Some extra info about libraries and sample programs. As I mentioned before all libraries and sample files are validated against the Jallib style guide.

Before adding any library or sample file this validation check should be done.

There is a Python script called 'Jallib3.py' in the tools directory on GitHub: https://github.com/jallib/jallib/tree/master/tools

jallib/tools at master · jallib/jallib Automatically exported from code.google.com/p/jallib - jallib/tools at master · jallib/jallib github.com

Place this Python script in de directory where your files are.

You then run this as follows for the validation: Python jallib3.py validate *.jal

You should have 0 errors and 0 warnings.

Kind regards,

Rob

---

Van: jal...@googlegroups.com <jal...@googlegroups.com> namens Rob CJ <rob...@hotmail.com>
Verzonden: vrijdag 2 december 2022 19:08
Aan: jal...@googlegroups.com <jal...@googlegroups.com>
Onderwerp: Re: [jallib] PCA9626 library - Status update

 

To view this discussion on the web visit https://groups.google.com/d/msgid/jallib/GVXP195MB1637B344543171D751798307E6179%40GVXP195MB1637.EURP195.PROD.OUTLOOK.COM.