ADS file with rc-master

[hans]

Hello ,
I am trying to combine the fine working example from the sample file : 16F18877_touch_ads7843.jal with the servo lib :  servo_rc_master.

 I can not do that.

 Is this combination possible and if so, what should I pay attention to?
But thanks again in advance.
Hans

[Rob CJ]

Hello Hans,

There should not be any interference as far as I can see. The servo library uses regular pins so does the ads7833 library.

If you could share your program that could help to analyze the issue.

I did hear from Peter some time agaon that he had problems with regular pins when using PPS. That was solved by defining the regular pins after PPS was done. 

If he declared them before executing PPS (not sure by the way if you are using PPS) then it did not work. Strange behaviour btw.

Kind regards,

Rob

---

Van: jal...@googlegroups.com <jal...@googlegroups.com> namens hans <hanz...@zeelandnet.nl>
Verzonden: woensdag 9 november 2022 11:11
Aan: jallib <jal...@googlegroups.com>
Onderwerp: [jallib] ADS file with rc-master

 

--
You received this message because you are subscribed to the Google Groups "jallib" group.
To unsubscribe from this group and stop receiving emails from it, send an email to jallib+un...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/jallib/bdcbdf9e-502c-4e2c-90ed-b5c3dcd2f78bn%40googlegroups.com.

[hans]

Hello all,.

I have erased the pic before programming and now it works !!

regards

Hans

Op woensdag 9 november 2022 om 18:54:01 UTC+1 schreef rob...@hotmail.com: