Barient 8P parts or ...?

[Jeff White]

One of my winches is missing the upper part of the 2-piece drum.  It's a ring/flange made of anodized Al.  Anyone know where to get a spare part?  Any suggestions on a replacement winch from another manufacturer that might even match the bolt holes?  Photos below show one winch with and one without the upper piece.

[Jeffrey Todd]

Jeff

Try Bacons sails in Annapolis. They have a lot of old used winches and parts. 

https://baconsails.com/?gad_source=1&gad_campaignid=22846230475&gbraid=0AAAAA_l2_e4ChH7eWPYSM_RUZn1OOpPrN&gclid=Cj0KCQjwvJHIBhCgARIsAEQnWlCDCqMlqjKwwoDYQH-3chh1UXCTH7c_wUq1TVFbGDfdN6CVc4bYZVkaAjgYEALw_wcB

Jeff Todd

C 410 353 5554

On Fri, Oct 31, 2025 at 11:51 AM 'Jeff White' via J22 Annapolis Fleet 19 <j22fl...@googlegroups.com> wrote:

One of my winches is missing the upper part of the 2-piece drum.  It's a ring/flange made of anodized Al.  Anyone know where to get a spare part?  Any suggestions on a replacement winch from another manufacturer that might even match the bolt holes?  Photos below show one winch with and one without the upper piece.

--
You received this message because you are subscribed to the Google Groups "J22 Annapolis Fleet 19" group.
To unsubscribe from this group and stop receiving emails from it, send an email to j22fleet-19...@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/j22fleet-19/f67dda7b-0059-4071-9cf7-6037d9b405e4n%40googlegroups.com.

[jacob doyle]

I replaced mine with the equivalent harkens…the bolt pattern will not line up…fill the old holes with thickened epoxy and drill new holes.  

Jake 

To view this discussion visit https://groups.google.com/d/msgid/j22fleet-19/CACv-yfVd4DzTPPnn-LFOaOKvuaj5VWT0LOpgfs0CEUNK49-1%2BA%40mail.gmail.com.

[Warren Richter]

The Barient’s mounting hole pattern is the same as Lewmar. You need a Lewmar 6P winch anodized. Link here

 https://www.westmarine.com/lewmar-6-one-speed-aluminum-non-self-tailing-winch-174656.html

-Warren 

On Oct 31, 2025, at 12:20 PM, jacob doyle <jaked...@gmail.com> wrote:



To view this discussion visit https://groups.google.com/d/msgid/j22fleet-19/CAMYT0-7mgz9RpDWArjT4pr7Bwa40iHLy0_9b76iWRWCNonstzA%40mail.gmail.com.