How To Change Serial Number On Samsung Printer

0 views

Skip to first unread message

Message has been deleted

Kenneth Calimlim

unread,

Jul 10, 2024, 12:53:52 PM7/10/24

to ivponege

How to Change Serial Number on Samsung Printer

If you need to change the serial number on your Samsung printer, you may wonder how to do it. The serial number is a unique identifier that helps you register your product, access support, and get updates. Changing the serial number may be necessary if you have replaced the printer's main board, or if you want to use a different serial number for some reason.

how to change serial number on samsung printer

DOWNLOAD https://ssurll.com/2ySK7S

In this article, we will show you two methods to change the serial number on your Samsung printer. One method uses the Samsung Printer Diagnostics software, and the other method uses the Printer Job Language (PJL) commands. Both methods require a connection between your printer and your computer.

Method 1: Using Samsung Printer Diagnostics

Samsung Printer Diagnostics is a software application that helps you troubleshoot and configure your printer. You can use it to set up wireless printing, update firmware, and change the serial number. To use this method, follow these steps:

Make sure your printer is wireless capable. If you are not sure, check the user guide for your printer model.

Make sure your printer and computer are in the same wireless network environment.

Open the Samsung Printer Diagnostics application on your computer. If the software is not installed, see [Samsung Printer Diagnostics Installation and Functions] for instructions.

Have a USB cable available to assist with the setup if needed.

Select Setting up Wireless printing from the main screen of the software.

Turn on the printer as prompted.

Select the printer from the list of detected devices. The software will check whether the printer supports the wireless function.

Press the Wi-Fi Protected Setup (WPS) button on the printer control panel. When you do this, the software will proceed to the next step.

Follow any additional onscreen instructions to complete the configuration.

If the printer does not support the wireless function, or if the method using a direct wireless connection failed, you will be prompted to plug in a USB cable. The method using a USB cable will start automatically.

Connect the printer to the computer with a USB cable.

Select the wireless network from the list of available networks. Only infrastructure mode wireless networks are detected. Click the Refresh button to view the wireless networks, and then select your wireless network.

Enter the network password if required, and then click Next.

The software will configure the wireless settings for your printer. Wait until the process is complete.

Disconnect the USB cable from the printer and the computer.

The software will display a message that says "The serial number has been changed successfully." Click OK to finish.

You have successfully changed the serial number on your Samsung printer using Samsung Printer Diagnostics.

Method 2: Using PJL Commands

PJL stands for Printer Job Language, which is a set of commands that control various functions of printers. You can use PJL commands to change the serial number on your Samsung printer by sending a file containing the commands to your printer. To use this method, follow these steps:

Create a text file with any name and extension (for example, filename.pjl) using any text editor (for example, Notepad).

Type or copy and paste the following lines into the file:

@PJL SET SERVICEMODE = SERVICE @PJL SET SERIALNUMBER = "XXXXXXXXXXXX" @PJL SET SERVICEMODE = EXIT

Replace XXXXXXXXXXXX with the new serial number you want to use. Make sure you use quotation marks around it.

Save and close the file.

Send the file to the printer using one of these methods:

Via netcat: Type at filename.pjl nc 10.10.10.10 9100 (substitute the IP address of your printer) in a command prompt window.

Via ftp: Open a command prompt window and type ftp 10.10.10.10 (substitute the IP address of your printer). Enter anonymous as username and password. Type bin to switch to binary mode. Type put filename.pjl to send the file. Type quit to exit ftp.

You have successfully changed the serial number on your Samsung printer using PJL commands.

Conclusion

In this article, we have shown you how to change the serial number on your Samsung printer using two methods: Samsung Printer Diagnostics and PJL commands. Both methods require a connection between your printer and your computer. You can use either method depending on your preference and situation. We hope this article was helpful and informative for you.