GPRS setting for meromobile on your personal computer

[infotechnab]

Select "Make new connection" (this should start a setup wizard)?
Choose "Dial up to Internet"? Choose the "connect via a modem" option?
Enter the telephone number to dial as *99***1# (No area code, and turn
off dialing rules)? Leave the username and password blank . ? When
complete, go to Control panel > networks, and right-click on the icon
for your GPRS connection. To need to set the following: Connect Using
- select your modem (infrared / USB / Bluetooth) You need change one
other thing- to do with your modem settings. Do this as follows: ? Go
to Start > Settings > Control panel > Modems? On the Modems tab,
select your modem, and press Properties? On the Advanced tab, you need
to enter string in "Extra initialization commands". This
initialization string will need to be entered as: AT
+CGDCONT=1,"IP","mero"
GPRS on a laptop Below is some information on how to configure your
laptop for use with a GPRS-enabled mobile phone, for Internet access:?
On the PC, go to the Networking section of the Control Panel (Start >
Settings > Control panel > Network)?

nabaraj Poudel
ascol (csit)