LVDS SHU 90deg Cable (UNCLASSIFIED)

0 views
Skip to first unread message

Harwood, Joseph H. SAM

unread,
May 1, 2013, 10:24:59 AM5/1/13
to Andrew House, Brandon Southgate, itres_jalb...@googlegroups.com
Classification: UNCLASSIFIED
Caveats: NONE

Andrew/Brandon,

Do you guys have a couple of LVDS cables that you could send us that have a 90 bend at the SHU end (or both ends)? We've had to arrange our CASI 2521 to align in the center isle right behind the operator's chair (see image). With our current set up it puts the cable in a comprising position with traffic walking past. Hopefully this would alleviate any connection issues that could occur as well.

Additionally, one of the hex connection studs on the SHU had a screw break off into the stud. We were unable to find a standard stud for the SHU and were wondering if you guys could send us some replacements.

Thanks,

J. Heath Harwood
Physical Scientist, Spatial Data Branch (CESAM-OP-J)
Operations Division
US Army Corps of Engineers, Mobile District
Joint Airborne Lidar Bathymetry Technical Center of eXpertise
7225 Stennis Airport Road, Suite 100
Kiln, MS 39556

228-252-1109 office
228-252-1133 fax
228-731-5465 blackberry
601-818-0801 cell

joseph.h...@usace.army.mil

http://spatialdata.sam.usace.army.mil/

www.jalbtcx.org



Classification: UNCLASSIFIED
Caveats: NONE


lvds_shu.JPG

Macon, Christopher L

unread,
May 1, 2013, 12:11:51 PM5/1/13
to Harwood, Joseph H. SAM, Andrew House, Brandon Southgate, itres_jalb...@googlegroups.com
Classification: UNCLASSIFIED
Caveats: NONE

Andrew,
Would these cables work?
http://www.cs-electronics.com/68-pin-cables.htm


Chris Macon
JALBTCX
Office: 228.252.1121
Cell: 251.459.5920
Classification: UNCLASSIFIED
Caveats: NONE


Reply all
Reply to author
Forward
0 new messages