Buildwin Media Player Usb Device Driver

[Jette Beyerlein]

How to Update Buildwin Media Player USB Device Driver
Buildwin Media Player USB Device is a device that allows you to play media files from a USB flash drive or a memory card. It is compatible with various formats such as MP3, WMA, WAV, AVI, MPG, and more. It also supports FM radio and recording functions.


If you have a Buildwin Media Player USB Device, you may need to update its driver from time to time to ensure its proper functioning and compatibility with your system. Updating the driver can also fix some issues or bugs that may occur with the device.



Buildwin media player usb device driver

DOWNLOAD https://jfilte.com/2wJHuo






However, updating the driver for Buildwin Media Player USB Device is not as straightforward as updating other drivers. This is because the device uses an inbox USB device driver that is provided by Windows, and Windows does not support co-installers for updating such drivers. Co-installers are software components that are used by some device vendors to update device firmware or perform other tasks during driver installation.


So how can you update the driver for Buildwin Media Player USB Device without a co-installer? In this article, we will show you two methods that you can use to update the driver for Buildwin Media Player USB Device. These methods are:



Firmware Update Filter Driver: This method involves using a vendor-supplied lower filter driver that performs the firmware update.
Firmware Update Device Driver: This method involves using a vendor-supplied lower filter driver that puts the device in firmware update mode, and then using another vendor-supplied driver that updates the firmware.

Both methods require you to download and install the vendor-supplied drivers from their website or from other sources. We will explain each method in detail below.


Firmware Update Filter Driver
This method involves using a lower filter driver that is supplied by the vendor of Buildwin Media Player USB Device. A lower filter driver is a type of driver that attaches itself to another driver and modifies its behavior or functionality. In this case, the lower filter driver attaches itself to the inbox USB device driver that is provided by Windows, and performs the firmware update for Buildwin Media Player USB Device.


To use this method, you need to follow these steps:



Download the firmware update filter driver from the vendor's website or from other sources. The file name may vary depending on the version and source, but it should have a .inf extension.
Connect your Buildwin Media Player USB Device to your computer using a USB cable.
Open Device Manager and locate your Buildwin Media Player USB Device under Portable Devices or Disk Drives.
Right-click on your Buildwin Media Player USB Device and select Update Driver Software.
Select Browse my computer for driver software.
Select Let me pick from a list of device drivers on my computer.
Select Have Disk and browse to the location where you saved the firmware update filter driver file.
Select the firmware update filter driver file and click Open.
Click OK and then Next to install the firmware update filter driver.
Wait for the installation to complete and then restart your computer if prompted.

After installing the firmware update filter driver, your Buildwin Media Player USB Device should have its firmware updated automatically. You can check the firmware version by going to Settings > System > About on your device.


Firmware Update Device Driver
This method involves using two drivers that are supplied by the vendor of Buildwin Media Player USB Device. The first driver is a lower filter driver that puts the device in firmware update mode. The second driver is a device driver that updates the firmware for Buildwin Media Player USB Device.


To use this method, you need to follow these steps:







Download both drivers from the vendor's website or from other sources. The file names may vary depending on the version and source, but they should have .inf extensions.
Connect your Buildwin Media Player USB Device to your computer using a USB cable.
Open Device Manager and locate your Buildwin Media Player USB Device under Portable Devices or Disk Drives.
Right-click on your Buildwin Media Player USB Device and select Update Driver Software.
Select Browse my computer for driver software.
Select Let me pick from a list of device drivers on my computer.
Select Have Disk and browse to the location where you saved the first driver file (the one that puts the device in firmware update mode).
Select the first driver file and click Open.
Click OK and then Next to install the first driver.
Wait for the installation to complete and then disconnect your Buildwin Media Player USB Device from your computer.
Reconnect your Buildwin Media Player USB Device to your computer using a USB cable. The device should now appear as a Firmware Update Device under Universal Serial Bus controllers in Device Manager.
Right-click on Firmware Update Device and select Update Driver Software.
Select Browse my computer for driver software.
Select Let me pick from a list of device drivers on my computer.
Select Have Disk and browse to the location where you saved the second driver file (the one that updates the firmware).
Select the second driver file and click Open.
Click OK and then Next to install the second driver.
Wait for the installation to complete and then restart your computer if prompted.



After installing both drivers, your Buildwin Media Player USB Device should have its firmware updated successfully. You can check the firmware version by going to Settings > System > About on your device.



Conclusion

In this article, we have shown you how to update Buildwin Media Player USB Device Driver without using a co-installer. We have explained two methods that you can use to update the firmware for Buildwin Media Player USB Device: Firmware Update Filter Driver and Firmware Update Device Driver. Both methods require you to download and install vendor-supplied drivers from their website or from other sources. We hope that this article has helped you to update your Buildwin Media Player USB Device Driver easily and effectively.



How to Download Buildwin Media Player USB Device Driver
If you don't have the vendor-supplied drivers for Buildwin Media Player USB Device, you can try to download them from other sources. One of the sources is DriverDouble, a website that provides drivers for various devices. To download Buildwin Media Player USB Device driver from DriverDouble, you need to follow these steps:



Go to https://www.driverdouble.com/drivers/buildwin-mediaplayer-usb-device.html
Scroll down to find the list of available driver versions for Buildwin Media Player USB Device.
Select the driver version that matches your OS platform and click Download Now.
Save the driver file to your computer and unzip it if necessary.
Follow the instructions in the driver file to install the driver.

Note that DriverDouble is not affiliated with or endorsed by the vendor of Buildwin Media Player USB Device. The drivers provided by DriverDouble are not guaranteed to work or be safe for your device. You should use them at your own risk and discretion.



How to Troubleshoot Buildwin Media Player USB Device Driver
If you encounter any problems or issues with Buildwin Media Player USB Device driver, you can try some troubleshooting steps to fix them. Some of the common troubleshooting steps are:



Check the connection: Make sure that your Buildwin Media Player USB Device is properly connected to your computer using a USB cable. Try to use a different USB port or cable if possible.
Check the device status: Go to Device Manager and locate your Buildwin Media Player USB Device under Portable Devices or Disk Drives. Right-click on it and select Properties. Check if there is any error code or message in the Device status section. If there is, follow the instructions to resolve it.
Check the driver update: Go to Device Manager and locate your Buildwin Media Player USB Device under Portable Devices or Disk Drives. Right-click on it and select Update Driver Software. Follow the steps to check if there is any newer driver available for your device.
Check the firmware update: Go to Settings > System > About on your Buildwin Media Player USB Device and check the firmware version. Compare it with the latest firmware version available on the vendor's website or other sources. If there is a newer firmware version, follow the steps in this article to update it.
Check the device format: Go to My Computer and locate your Buildwin Media Player USB Device under Removable Storage. Right-click on it and select Format. Choose FAT32 as the file system and click Start. This will erase all data on your device and format it to a compatible file system.

If none of these steps work, you may need to contact the vendor of Buildwin Media Player USB Device or seek professional help.



How to Use Buildwin Media Player USB Device
Once you have updated the driver for Buildwin Media Player USB Device, you can use it to play media files from a USB flash drive or a memory card. To use Buildwin Media Player USB Device, you need to follow these steps:



Insert a USB flash drive or a memory card that contains media files into your Buildwin Media Player USB Device.
Connect your Buildwin Media Player USB Device to your TV or monitor using an AV cable or an HDMI cable.
Turn on your TV or monitor and select the appropriate input source.
Turn on your Buildwin Media Player USB Device using the power button or the remote control.
Use the navigation buttons or the remote control to browse and select the media files that you want to play.
Use the playback buttons or the remote control to control the playback of the media files.

You can also use the menu button or the remote control to access the settings and options of your Buildwin Media Player USB Device. You can adjust the volume, brightness, contrast, language, and other parameters of your device. You can also switch between different modes such as music mode, video mode, photo mode, FM radio mode, and recording mode.



How to Troubleshoot Buildwin Media Player USB Device
If you encounter any problems or issues with Buildwin Media Player USB Device, you can try some troubleshooting steps to fix them. Some of the common troubleshooting steps are:



Check the power: Make sure that your Buildwin Media Player USB Device is properly powered on and has enough battery charge. Try to use a different power adapter or battery if possible.
Check the connection: Make sure that your Buildwin Media Player USB Device is properly connected to your TV or monitor using an AV cable or an HDMI cable. Try to use a different cable or port if possible.
Check the format: Make sure that the media files that you want to play are compatible with your Buildwin Media Player USB Device. The supported formats are MP3, WMA, WAV, AVI, MPG, and more. Try to convert or reformat the media files if necessary.
Check the device status: Go to Settings > System > About on your Buildwin Media Player USB Device and check the device status. Check if there is any error code or message in the device status section. If there is, follow the instructions to resolve it.
Reset the device: If none of these steps work, you may need to reset your Buildwin Media Player USB Device to its factory settings. To do this, go to Settings > System > Reset on your device and select Yes. This will erase all data and settings on your device and restore it to its original state.

If none of these steps work, you may need to contact the vendor of Buildwin Media Player USB Device or seek professional help.



Conclusion
Buildwin Media Player USB Device is a device that allows you to play media files from a USB flash drive or a memory card. It is compatible with various formats such as MP3, WMA, WAV, AVI, MPG, and more. It also supports FM radio and recording functions.


In this article, we have shown you how to update Buildwin Media Player USB Device Driver without using a co-installer. We have explained two methods that you can use to update the firmware for Buildwin Media Player USB Device: Firmware Update Filter Driver and Firmware Update Device Driver. Both methods require you to download and install vendor-supplied drivers from their website or from other sources. We have also shown you how to use and troubleshoot Buildwin Media Player USB Device.


We hope that this article has helped you to update your Buildwin Media Player USB Device Driver easily and effectively. If you have any questions or comments about this topic, feel free to share them with us below.

a8ba361960