Generic A15 Huawei Driver

[Adriana Gowen]

My3G dongal requires the proprietary driver to properly work with Ubuntu.

It comes along with Huawei Mobile Partner installer. I was able to install Huawei Mobile Partner and the corresponding driver in Ubuntu Linux 10.04 without an any problem.

"make: *** [install] Error 2

Install NDIS driver failed.

The compiling environment is not all ready.

Please check gcc, make and kernel build(/lib/modules/3.8.0-26-generic/build) to be all installed?

Now please enter any key to finish other installations.

NDIS is disabled, and only Modem can be used".

These packages gcc, make, and others are installed.

(The output is taken from a previous version of Ubuntu. The same error message is generated in 13.10. You can regenerate this error by trying to install my driver package. The mobile broadband is not required for the installation)

That's all.I created this script because in the above answer,i mentioned to locate to the line 2718 and add // infront of it.But in some cases the code dbg ("cant't kmalloc dev"); was not on the line 2718,so it was so hard to find the line of code manually and then add // infront of that.

This script automatically search for the line which contains the code dbg ("cant't kmalloc dev"); and put // infront of it.So that the line of code changes to comment,and then make the NDIS driver to install successfully.

Configure a separate section for each driver using thesenames. You need to define in each section at least the optionshare_driver and assign it the value of your driver. In thisexample it is the generic driver:

I ran into a bug that crashed dwc2_lowlevel_hw_disable when using the dongle in "HiLink router mode" with kmod-usb-net-cdc-ether, so flashed the dongle to "stick mode" and now using kmod-usb-net-huawei-cdc-ncm instead.

it looks like some part of netifd may be confused whether the "option mode" clause should really be "option modes", when I added both options it silenced the error but didn't help the interface to start.

If I use minicom -D /dev/cdc-wdm0

I don't get any response to AT commands, but then if I try the same when the stick is plugged into the Fedora PC, I get no responses either, so that may not be significant

Wrt the config: Did /dev/cdc-wdm0 work as an AT command management device in Fedora? IIRC, different Huawei firmwares beahve differently here. But if the /dev/ttyUSBx device works, then I guess this isn't important.

This is misleading at best. That might have been the original meaning, but the option driver is now a multi-vendor generic fast USB serial driver. And it specifically supports the serial functions of most Huawei 3G and LTE modems.

That is pointless. Did you try this yourself? The usb-wwan module is only a support module with some shared functions for option, qcserial and ipw drivers. It supports no modems by itself. But the option driver depends on it, so it will be installed when you install it.

It can be a bit confusing, because you have to use the /dev/cdc-wdm0 on some Huawei modems. On most you can use either the /dev/cdc-wdm0 or the /dev/ttyUSBx devices. And yet another bunch is like yours where you have to use /dev/ttyUSBx.

Not sure how far it's getting with that, but "ip route show" doesn't have anything on the wwan0 interface, and the interface has no IP address, Interface still shows "up" but without receiving any bytes ...

Actually I just ran modemmanager in debug mode

however the output is too big to paste here,

I tried to upload as an attachment, but it apparently I'm only authorised to upload ,jpgs etc

can someone authorise me to upload a .txt file?

I have a Huawei matebook X Pro laptop. I am trying to install Premiere Pro 2020 but I get a warning telling me that my Intel display driver and my Nvidia display drivers are out of date and may cause crashes and loss of data so need to be updated.

Is there anything I can do to install PPro 2020? I am currently seeing if PPro 2019 will install, but when v2021 comes oout I will be out of luck with v2019.

Is this anything to do with the trade emargoes imposed by the USA on China? 9I don't want this poist to become political - just technical).

1. The current version of your Intel display driver may cause performance and stability issues. It is strongly recommended that you update to driver version 100.8476 or later. Drivers are provided by Intel or your computer's manufacturer.

URL: -pro/kb/drivers-video-win-intel.html

A customized computer manufacturer driver is installed on your computer. The Intel Driver & Support Assistant is not able to update the driver. Installing a generic Intel driver instead of the customized computer manufacturer driver may cause technical issues. Contact your computer manufacturer for the latest driver for your computer.

My wifi driver (Intel(R) Wi-Fi 6 AX201 160 MHz) has completely ceased to function. I've tried running the Driver Assistant tool multiple times, and installing the newest version of the driver has not helped at all.

I'm not very technologically inclined and I'm having a really hard time understanding what to fix here.

What mean for you "manully shutdown", "manually restart" - I usually go at Windows icon then Power -> Restart/Shutdown.

Maybe you can check my components at my profile, I install "Intel Driver & Support Assistant". I am Computer engineer and work like Web developer, so I know some stuff. I also bring PC to local PC experts but did not helped me. Motherboard seller said that he did not have fault Motherboard like this, usually is something bigger. He also think this is driver issue/conflict and he can send me new motherboard.

I have a similar problem with the Intel Wifi 6 AX201 160Mhz, it still doesn't work despite following the same instructions, I recently did a fresh install of Windows 11 and to date it's the only device that doesn't work. The strangest thing about the issue is that Bluetooth doesn't work either and it doesn't appear in the list of devices, can you help me?

For the people with issues make sure you really follow each step as Scott mentioned and, for me, after the new drivers are installed I had to shut down the pc on the power button otherwise would still fail for some reason.

I have a Dell Optiplex 7090 with AX201 network adapter, been having problems lately, at least 3 months of this. I have a huawei AX3 Wifi 6 router, before it was working fine, usually got 2.1gbps speed, suddenly AX201 dropped. I have a notebook with AX201 showing similar symptoms.

The symptoms that I found were that I couldn't access Wifi 6 5GHz, only 2.4GHz.

Apart from wifi 6, I also have a wifi 5 router TPlink C8 which also worked fine before, on average it can get speeds of up to 1.3gbps.

After the issue of not being able to connect to 5GHz wifi 6, I tried connecting to Wifi 5, it turns out that the highest speed is only 190mbps.

I have tried the steps given here, I applied on a notebook and Dell Optiplex 7090, but it didn't work, the symptoms remain the same.

I have another older notebook but the wifi card has been replaced using the AX210, it doesn't show the same symptoms as the AX201.

Finally I tried changing the wifi card on my Dell Optiplex 7090 using AX210, the above symptoms disappeared, AX210 worked perfectly, connecting to Wifi 6 got 2.1gbps, and to wifi 5 got 1.3gbps on the same wifi network as AX201 used.

It can be concluded that the issue is indeed the problematic AX201, if you search the internet, many complain about the AX201, and not a few who provide various kinds of troubleshooting but nothing works.

Hi, even though this fix works for a while, it isn't a final complete fix, the problem is related with some keyboards or mouses wireless, Logitech in my case as soon as I disconnect the wireless keyboard and mouse restart the machine and reinstall the driver the problem is gone. Something in this chip doesn't like my wireless mouse or keyboard.

Buonasera, ho un LENOVO YOGA C640-13IML, dove da un p di mesi ha installato windows 11. Da un giorno all'altro l'icona WIFI e BLUETOOTH sono scomparse, ho provato ad eseguire i passaggi elencati sopra ma il problema persiste, ho fatto anche un reset del pc ma non cambiato nulla. Volevo provare a tornare a windows 10 ma non posso perch passato troppo tempo.

Al momento per la connessione wifi e bluetooth sto usando un adattatoe della tp link realtek 8821cu ma senza questo non saprei cosa fare. Ho consultato altri rimedi tramite la community ma nessun risultato. Ho anche scaricato e installato manualmente i singoli driver scaricati dal sito Intel ma nessun rimedio. Allego foto INTEL WIFI 6 AX201 160MHZ NOT WORKING

Hi I created an account for this. It works in 2024. This bug happened when I was about to submit my report under tight deadline, I almost cried. This post is that useful for me, thanks n_scott_pearson. Here, that's what I did.

1. My wifi widget was not available. I am not using any other bluetooth gadgets, only mouse and audio.

2. I went to device manager, found out that Intel Wifi 6 module is disconnected. I uninstalled the drivers, that's all.

3. I unplugged my laptop (not sure necessary)

4. I manually shutdown via the windows tab. I let capacitors discharge for 2 minutes.

5. I turned on the laptop and the wifi widget is back (I further went to device manager, and the module is automatically connected).

6. I connect back my power cable.

Some of these actions are built upon my experience with Dell laptops. Weird charging management system will affect audio, wifi and other devices. Not too sure why, but my rule is not to turn on/off Dell laptops with plugged-in power. Hope this might help any poor Dell users.

First of all, before installing ANY device drivers, you installed the Intel Chipset Device Software package provided by MSI, right? If not, install it and then repeat my instructions above. Secondly, it is important to install the Intel Chipset Device Software package BEFORE installing the Intel Driver and Support Assistant. But, hold on, there are other driver packages that you need to install manually beforehand; read this page for more details: Intel Driver & Support Assistant Exclusions

3a8082e126