Laserpecker 2 Vs 3

[Ailene Goldhirsh]

Inoticed that Lightburn reports that the firmware version of the laser pecker is 6.5.2 however the firmware version from the LP4 app on my phone reports the firmware to be 6.5.3. The LP4 is supposed to work with Lightburn only with 6.5.3. Something appears to be wrong with the firmware in LP4. I would try to re-load the firmware but there appears to be no way to do this after it is done once.

ColinW,

It might be helpful if you contacted LP support :sup...@laserpecker.com and mention people are having this problem. Their support believes LP4 works with LB. When I first reported this issue, they responded and said they had fixed it but did not notify me of any firmware revisions. On the offhand chance that the firmware was updated but nobody told me, I tried to re-load it following their instructions, and I get a message that my firmware is up to date.

I found two bugs in the LP4 Windows Design Space software. V2.2.0 does not rotate images correctly some of the time in the 2K resolution, and all of the time in the 4K and 8K resolutions, and the update, V2.2.1 rotates the images just fine but buggers up rotating the text - in both vesions the text and images are rotated correctly on screen but are not engraved correctly. In V2.2.1, the undo function totally destroys the rotated text on screen. V2.2.0 is pretty solid for text, so I use it for text, but for anything with both text and images, I use LB and then import into LP.

3a8082e126