PES 2010 Kitserver

[MSI WIND]

Hi everyone,

I have a problem with the kitserver of PES 2010, I can't reach the
save button to save the config. Now I found a solution but I don't
know if I did it the right way. When you press the save button there
will appear a config.txt within the kitserver folder, which was name
config-sample.txt before? Now can anyone make a screenshot of their
kitserver folder and their config.txt or upload their config.txt,
where they have "Adjust aspect ratio" turned on 'Automatically'?

They way I have done it now:
Kitserver folder: http://www.image-share.com/ipng-297-234.html
Config.txt: http://www.image-share.com/ipng-297-235.html

Thanks in advance!

[uncleferassi]

[afs2fs]
debug = 0
img.dir = "pesedit"

[afsio]
debug = 0

[kload]
dll = zlib1.dll
dll = libpng13.dll
dll = afsio.dll
dll = kserv.dll
dll = afs2fs.dll
dll = lodmixer.dll
dll = camera.dll
dll = speeder.dll
dll = time.dll
gdb.dir = "."

[lodmixer]
aspect-ratio.correction.enabled = 1
screen.height = 768
screen.width = 1280

[time]
match.time = 90

This is my config.txt
Good Job on figuring it out :)
Keep in mind though, I tweaked a few things, such as resolution

[uncleferassi]

and Match Time

On Jul 13, 5:14 am, MSI WIND <floristenbe...@hotmail.com> wrote:

[MSI WIND]

Ok thank you uncleferassi! Can you please upload a screenshot of your
kitserver folder, just to check if I changed it the right way (from
config-sample.txt to config.exe etc)?

> > Thanks in advance!- Tekst uit oorspronkelijk bericht niet weergeven -
>
> - Tekst uit oorspronkelijk bericht weergeven -

[uncleferassi]

Here
http://www.image-share.com/ipng-298-50.html
I installed some mods to it (Pesedit 2010 World Cup), that's why there
are extra folders in there..

[MSI WIND]

Ok thanks! But now I see two additional configs.. Config-nl.txt and
Config-def.txt has that something to do with other things you
installed or is that just the default kitserver? Because I can't reach
my safebutton I changed the config-sample.txt into config.txt and set
adjust aspect ratio to 1 (enabled) but I don't really know if it's
working.. I noticed a little improvement but it can be just the
kitserver that made it...

On 14 jul, 01:24, uncleferassi <tom.eliz...@gmail.com> wrote:
> Herehttp://www.image-share.com/ipng-298-50.html

> > > - Tekst uit oorspronkelijk bericht weergeven -- Tekst uit oorspronkelijk bericht niet weergeven -

[MSI WIND]

I already figured it out, thanks again uncleferassi!

[uncleferassi]

You can try making the resolution higher and see if you don't lose
that much FPS.
Good work though!