Thank you for contacting Intel Technical Support. Total power consumption
can be calculated in two parts. First find the current consumption value
for the mode you're in and multiply that by the Vcc supply voltage (P=IV).
Then you will need to add the power consumed by the I/O of the flash. This
is done by multiplying the Vccq supply voltage times the amount of the sum
of current you are drawing from the flash pins. The current specifications
are located in the device datasheet at:
http://developer.intel.com/design/flcomp/datashts/290667.htm.
Regards,
Tamara P.
Intel Technical Support
http://developer.intel.com/design/flash/
Intel's trademarks may not be used without the permission of Intel
chetan wrote in message ...
Thank you for contacting Intel Technical Support. The recommendation for
the requirements listed below is the 3 Volt
Intel(R) StrataFlash(TM) Memory family. The 3 Volt Intel StrataFlash memory
components utilize reliable two-bit-per-cell technology to deliver high
density 128M-bit parts. A product overview, along with additional
documentation on the device can be found on the web at
http://developer.intel.com/design/flcomp/prodbref/298044.htm
For pricing and availability, please contact an authorized distributor. A
listing of our distributors is located on the web at
http://developer.intel.com/design/disti/
Regards,
Tamara P.
Intel Technical Support
http://developer.intel.com/design/flash/
Intel's trademarks may not be used without the permission of Intel
varaprakasam <varap...@rediffmail.com> wrote in message
news:ee9e...@WebX.9CDEEn2n...