Continuous reads from C3 flash?

[David Purdy]

I need to read data from flash at a 100 ns rate. Can I just leave OE and CE active all the time and just update the address and sample the read data every 100ns? The datasheet doesn't indicate this would be a problem but I would like confirmation.

[Tamara P.]

Hi,

Thank you for contacting Intel Technical Support. As long as you wait
longer than tAVQV (Address to Output Delay) as specified in the Flash
component datasheet, you can hold OE# and CE# low and put a new address on
the address pins. After this period, valid data will be present on the data
bus. The device data sheet is downloadable from the web at
http://developer.intel.com/design/flash/datashts/index.htm

Regards,
Tamara P.
Intel Technical Support
http://developer.intel.com/design/flash/

Intel's trademarks may not be used without the permission of Intel

David Purdy <D.P...@ericsson.com> wrote in message
news:eea0d...@WebX.9CDEEn2n...