Google Groups no longer supports new Usenet posts or subscriptions. Historical content remains viewable.
Dismiss

Processor Upgrade for ATC-1000 82430FX Motherboard

37 views
Skip to first unread message

Bill Lindoerfer

unread,
Nov 5, 1998, 3:00:00 AM11/5/98
to
I'm trying to upgrade my ATC-1000 82430FX Motherboard processor from an Intel P-150 to an Intel P-200MMX. I can get it up and running; however, I cannot get the system to recognize more than 166mhz. I've tried all of the jumper settings in my manual but they don't seem to work. Also tried reading the online manual at this site but it's for the ATC-1000 430VX, not the 430FX like I have. If anyone can help me to correct this problem I would greatly appreciate it. Here is my information:
Motherboard: ATC-1000 Intel 82430FX PCI/ISA Mainboard
Old Processor: Intel P-150
New Processor: Intel P-200MMX
Writing on New Processor: Intel with MMX tech


Bill Lindoerfer

unread,
Nov 5, 1998, 3:00:00 AM11/5/98
to
Writing on New Processor: Intel with MMX tech, FV80503200, SL27J/2.8V, MALAY, L8412424-0331
When the BIOS boots up it says: Award Modular BIOS 4.50PG, ATC-1000 Intel 82430FX BIOS VER: 2.0 01-23-96 Pentium-S CPU at 166mhz Award Plug & Play BIOS Extension V1.0A 01/11/96-i430FX-2A59CA29C-00
Thank you, Bill L. (Please respond to my email).

Steve W.

unread,
Nov 5, 1998, 3:00:00 AM11/5/98
to

The motherboard that you have listed does not correspond to an Intel
manufactured motherboard. Many motherboard manufacturers use Intel
chipsets in various implementations. Please contact your place of
purchase or motherboard manufacturer for BIOS upgrades, driver updates,
and for support of your motherboard.
--

Steve W.
Intel Technical Support

* All other brands and names are property of their respective owners.

Edwin van Boven

unread,
Nov 5, 1998, 3:00:00 AM11/5/98
to
On 5 Nov 1998 04:10:32 GMT, Bill Lindoerfer <li...@paonline.com>
wrote:

>I'm trying to upgrade my ATC-1000 82430FX Motherboard processor from an Intel P-150 to an Intel P-200MMX. I can get it up and running; however, I cannot get the system to recognize more than 166mhz. I've tried all of the jumper settings in my manual but they don't seem to work. Also tried reading the online manual at this site but it's for the ATC-1000 430VX, not the 430FX like I have. If anyone can help me to correct this problem I would greatly appreciate it. Here is my information:
>Motherboard: ATC-1000 Intel 82430FX PCI/ISA Mainboard
>Old Processor: Intel P-150
>New Processor: Intel P-200MMX
>Writing on New Processor: Intel with MMX tech
>

Hi,
Did you email A-trend tech support with this question?
http://www.a-trend.com
Best Regards,
edwin

Anti-spam line:
u...@ftc.gov http://www.e-scrub.com/cgi-bin/wpoison/wpoison.cgi

0 new messages