How to Calculate damaged News Print

[vasantharao gadde]

Dear Sir

 

Please give the formula to calculate damaged news print as per lioyd's formula or any other formula

 

 

from

 

G VASANTHA RAO

KHAMMAM

[ASAR]

Kindly remind me on Monday evening.

--
You received this message because you are subscribed to the Google Groups "Insurance surveyors" group.
To unsubscribe from this group and stop receiving emails from it, send an email to insurance_surve...@googlegroups.com.
To post to this group, send email to insurance...@googlegroups.com.
Visit this group at http://groups.google.com/group/insurance_surveyors.
For more options, visit https://groups.google.com/groups/opt_out.

[Shailesh Shah]

Hi Rao
Just sent u links which have formula u r looking for.
Make internet your friend.
Best luck.
The real challenge is not just calculating loss as per this formulae but to get insured broker team to consent on that.

[Ashraff Tim]

Hi Vasanth,

The following is the Lloyd's formula, I am using since 1982, and you do not have to wrack your brain, it is  very simple

QUANTITY DAMAGED =         4T(D – T) W                                                                                               
                                                       D² – C²

Where,  T    =  Radial Depth of Damage in Inches

               D   =  Dia of the Reel

               W  =  Wight of Reel

               C   =  Dia of the Core

Best Regards

Tim Ashraff

--

[Rajeswar Rao Vijay Parsa]

Respected Sir,
You can go to Google.co.in and ask for How to calculate News print you get it
If not go http://www.pfresolu.com/Products/Paper_Calculation_Tools/
You try at this web site
What is the diameter
Up to what diameter paper damaged
width of the paper roll
OD and ID you need to Know
 
With best wishes
 
P V RAJESWAR RAO
 

---

Date: Fri, 29 Nov 2013 19:13:46 +0530
Subject: {Surveyors:18903} How to Calculate damaged News Print
From: gaddevas...@gmail.com
To: insurance...@googlegroups.com

[Hariom Gupta]

Dear Sir,

             You may go through the suggested site by Sri Rao or apply the below given formula on each print roll and get the wt. of the damaged portion of the roll in kgs. You may converted the wt. unit in MT

4T(D-T)*W/D2-d2

T = Damage of roll in cm

D = Dia of roll in cm

d = Dia of bobbin in cm

W = Wt. of the roll in kgs

D2 & d2 = D square & d square

Regards

Hari Om Gupta - The Vidrohi

[Chand Bhatia]

Dear Mr Hari Om

I think there is some mistake in your formula. The core Dia does not appear in it, in fact not relevant as that shall be common in either case. The formula can be derived by simple algebra. 

But no body is mentioning if the core is cut and damaged. Then what. 

C K BHATIA

c k bhatia
09810231248

[Hariom Gupta]

Dear Sir,

             The Dia (d) of the bobbin is the core dia and in case of cut/ damaged of it. The change in core size does not effect, as the Dia (D) will also changed.

 

Regards

 

Hari Om Gupta