Hypertherm Pronest 2012 Rar 40
Gaspard Xenos
Did you ever resolve this? I have used this program for a few years and have the same problem after migrating to a domain. ProNest is a real pain to find support for online and very expensive to get help for from them. I do have a work around to this problem. If you install the app on the local system under an account with admin rights, it works fine. Also try rebooting too. I had those same errors while trying to repair the install and a reboot allowed the local account to then start the program. I was thinking this may be a permissions issue so I created a group called ProNest Users, added my domain account as a member and gave it rights to the pronest directories. This did not resolve my problem, However, take note that if you log on locally, then switch user over to the domain account, without logging out the other, ProNest will run! If you log out of the local account, pronest will not start, but if you run-as-different-user you can get ProNest to start under the domain account. Something starting/accessing the database is looking to either the local user's profile or something in that database file. I will keep hunting because this is annoying. There is an install that you can get from ProNest, that I have, that sets up a shared DB. I have a copy of it for 13.1 along with the PDF on how it works and how to configure it. I have not tried this yet, but will, since it relocates the database to a central location and tells you what you need to do to point the DB.ini to it. It does talk about relocating the data source in the db.ini and maybe I could tweak for this purpose.
Hypertherm's Jim Colt is an avid fabricator who has worked with plasma cutting systems for more than 30 years. He is the author of many articles and white papers on plasma cutting and a frequent speaker at key industry conferences. If you have a question you'd like Jim to answer please send it to ask...@hypertherm.com.
Hi guys. I am clearly new on here and new to autocad as well. I am using pronest 8 and autocad 2011. I am using for a steel service center with a burn table. 400A hypertherm plasma, dual oxy fuel torches and a 30hp drill. Im sure I will have many questions but to start with:
I want to draw parts in autocad and then transfer them to pronest. How do I do this. I have been struggling for a while now. Also with me using this to draw parts for a plasma what kind of template should I be using? If anyone can help me I would be so greatful. And once we get that out of the way if someone can point me in the right direction of like a beginners manual that would be great!
i guess my problem is when i try to import a part into pronest it wont "find" my drawn parts It will only let me open .pnl (i believe thats what it is) I am doing this by going to import part list. is this what im doing wrong? thanks again guys
ok here is the deal i draw a part in autocad 2011. then do i need to save it or export? then when i open pronest(2008) do I open or import? when i get into pronest to try and open or import it will only search for .pnl files i simply need in dumb terms how to be able to take my saved part from autocad and open it in pronest. sorry to keep this going but I am very new with both programs. thanks again guys
aa06259810