Black Ops 3 Loading Screen
Outi Foote
I just reverted my game to 1.8.1 so I could install KSRSS, and now when I launch the game, it gets hung up on the black loading screen. You know, the one right before the title screen with the spinning planets in the bottom-right corner. The game isn't frozen--the little planets are spinning, the main title music even comes on--but it just never moves past that loading screen. I'm trying to paste my logs, but pastebin won't do it. Any other ideas?
I just put KSRSS onto my game (and I had to revert to version 1.8.1 to do so), and now the game won't launch. Once the loading bar fills and says, "Expansion Loading Complete!", the game goes to the dark screen with the little spinning planets in the corner, and just stays there indefinitely. The tiny planets just go on revolving the little sun, and the title screen never comes up (unlike before I put the mod on, when it worked just fine). This goes on for at least twenty minutes (at which point I quit and close it) with no sign of change. Anybody know why or what can be done? The game isn't frozen, because it's gotten stuck on the loading screen before and when that happens the little planets are also frozen in place. What's happening now appears to be the computer perpetually loading and loading but never finishing. I don't think it's a hardware problem, since I successfully installed and run RSS and RO just a couple of months ago.
I'm trying to post my game logs (including the crash logs), but I can't figure out how to attach a link to them (pastebin is not working, and anything else I try to use crashes when I inundate it with the sheer volume of text). How do I do that?
I'm seeing an incredible list of NullReferenceExceptions from Kopernicus in your logs. It all seems to start because Kopernicus can't load Ceres' config and throws an exception, then because of that it can't find the Sun and then everything goes off the rails. The game keeps trying to load, but Kopernicus keeps throwing exceptions and it gets stuck in a loop, never going anywhere.
There's also a d3d11 texture error being spammed in there too which in my experience is caused by an out of date graphics driver. You should probably update your graphics drivers, otherwise the graphics can freeze but the rest of the game is still running which is never a good thing.
You've made the rookie mistake of putting mods into a Steam-controlled copy of KSP. Don't do that- Steam tends to interfere and may have corrupted something; instead, copy the entirety of KSP (C:\Users\your_user\ProgramFiles(x86)\Steam\steamapps\common\Kerbal Space Program, grab the KSP directory) somewhere outside of Steam's control, like your desktop, and then add mods to it. You should try deleting all your mods from the Steam instance, verifying the game files and making sure everything is OK first, then copying KSP and adding the mods back in.
3. Copy the folder called Kerbal Space Program (the one inside the ...Steam\steamapps\common folder), and move it to somewhere outside the steamapps folder, somewhere like the desktop (should I delete the version inside the steamapps folder to keep from confusing the computer when I launch the game?)
I checked my graphics driver, and the laptop says that I already have the best one. Is there another way to mitigate the effects of that d3d11 texture error? I haven't experienced major graphics errors in the past (excluding during physics warp, but that's for another post...), so might it be all right the way it is if I already have the best driver?
3. Copy said KSP folder to a not-special-Windows folder, e.g. C:\KSP
Leave the Steam downloaded KSP untouched (you'll need Steam being aware that you have KSP there if you later want to install an upcoming update).
From here on, only use the C:\KSP folder.
Okay, so I did all that, but I Ctrl+Xed my KerbalSpaceProgram folder instead of Ctrl+Cing it. I just put it back exactly where it was (...steamapps\common); am I still okay?
I do have CKAN, and I like it for its auto-installation, but I find it pretty limited the number of mods it offers. It doesn't have KSRSS or any of its dependencies, so I had to get those from GitHub and manually install them (which took a few tries to get right).
I ran the Steam check and it said "1 file could not be verified and will be reacquired." Then nothing else appears to happen; is Steam reacquiring that file automatically when I launch the game next or something?
I used Dropbox with total success last night to create a link to my files, but now I can't figure it out. The files I uploaded last night appear as .txt files on my home page, and there's a "Share" button I can hit, which then gives me the option to "Copy link." But the ones I'm uploading now don't appear on my home screen. I go to All Files, and they're there, but the "Share" button is nowhere to be found, so I can't get the link. Also, they're uploading as .log files instead of .txt, even though the files themselves are originally .txt.
Now we're going into mod specific areas, I'd suggest, if there are further issues, you post your question(s) in the respective mod threads. I'm afraid, but I can't help you any further with those specific mods as I'm not using them myself.
When I select the multiplayer mode, then step in to the portal to start it, the black loading screen appears with the yellow flower loading icon spinning. I get stuck at this screen, and have to press the home button to quit and shut down the game.
I have been having the same problem for the last couple weeks. My husband and I play split screen every day. When trying to play multiplayer Turf Takeover, we can match, and then see the map screen, but then it goes black with the daisy icon in the corner instead of taking us to character select. Eventually, we get kicked back to the main garden and it says we were kicked for being idle.
Having the same problem, but only when it tries to load the Suburban Flats map in Turf Takeover. Happens on my profile and on my wife's profile. Networking wouldn't be the problem because it is only on the one map. Possibly corruption of that map, but it eventually kicks us back to the backyard saying we were kicked for inactivity even though it never loaded.
Hey Everyone
As this thread is a bit old at this point, things have changed and been updated, we are going to lock this down so that we can prevent any necro-posting.
If you run into any further issues please create a new thread or add your information to an existing thread so that we can begin tracking accordingly!
Cheers!
Hi can someone help me? Every time I'm going to start a new flight, the Xplane loading screen becomes just black and if I tried to alt + tab x plane will crash. This just happens after updating to 11.51 and updating my graphic driver. And why I'm always receiving this warning:
You seem to have installed X-Plane in a location (C:\Users\acer\Documents\X-Plane 11\) that the user account you run it under has no write access to (apart from the log, apparently) - that is a very bad idea, as X-Plane does need to write out to various files, including the scenery_packs.ini file whenever it finds a new folder in Custom Scenery. You can also see that some of your plugins are complaining about the lack of write access too
You only have 4GB of memory (minimum required is 8GB), and are using the on-chip graphics processor of your CPU (which as it is a laptop CPU, isn't very powerful). If you do have a separate GPU in the laptop, you need to make sure that is being used by X-Plane when you run it (as you mentioned you just updated the graphics driver, maybe something got reset?) - but that won't fix the lack of system memory.
I have a project (unfortunately I can't share the file due its sensitive content) where I have different buttons linked to other scenes in the project (a nav bar basically)
Issue 01: When clicking into one of those buttons, there is a 2 seconds gap where all I can see is a grey loading type of screen before it takes me to the correct scene. This is behaviours makes the overall UX very weird and I want to find the reason behind this and fix it (never happened to me before in a Storyline project)
Issue 02: Not sure if related to issue 01, but when I try to preview, all I get is a White screen and can't preview at all. The only way to test my scenes is by publish them for review, which is time consuming as you can imagine. NOTE: this happens with all my SL files, and it started since last update.
I would really appreciate your support and expertise on this.
Thank you!
If it is at all possible to remove any sensitive information from your .story file, you can share it with us privately in a support case. We'll delete it once we've completed testing and can send an NDA if needed.
Hi Lauren, thanks for your reply. The "white preview" issue only appears when I preview it. So I am in need of publishing so I can test results. The loading screen only appears when I publish, can't evaluate this issue when preview as previewing does not works for me.
Attaching an image of the "loading screen" issue.
I will try repairing storyline and let you know if that solved the issue.
Thanks!