How to wake up slave from standby
134 views
Skip to first unread message
prasapn
Nov 6, 2011, 9:29:15 AM11/6/11
to Input Director
I have a windows XP master and windows 7 slave configuration.
Everything works fine when both the machines are active.
But when they go to power-saving standby mode, slave does not
wake up when I use the hot-key to switch. On a direct connected
keyboard
and mouse, slave computer wakes up on a mouse or keyboard click.
Any idea what I may be missing ? (sorry if it is in the FAQ, couldn't
find)
Everything works fine when both the machines are active.
But when they go to power-saving standby mode, slave does not
wake up when I use the hot-key to switch. On a direct connected
keyboard
and mouse, slave computer wakes up on a mouse or keyboard click.
Any idea what I may be missing ? (sorry if it is in the FAQ, couldn't
find)
Shane
Nov 8, 2011, 3:22:38 AM11/8/11
to Input Director
Open Input Director on your slave and switch to the "Slave
Configuration" tab. Enable the "Synchronise the screensaver with the
Master System" option.
Regs,
Shane.
prasapn
Nov 8, 2011, 8:41:05 AM11/8/11
to Input Director
> Hi,
>
> Open Input Director on your slave and switch to the "Slave
> Configuration" tab. Enable the "Synchronise the screensaver with the
> Master System" option.
>
> Regs,
>
> Shane.
Thanks for the reply but that option has already been enabled in the
>
> Open Input Director on your slave and switch to the "Slave
> Configuration" tab. Enable the "Synchronise the screensaver with the
> Master System" option.
>
> Regs,
>
> Shane.
slave.
(All 3 options under slave preference are enabled).
Reply all
Reply to author
Forward
0 new messages