100% fill density in the parts?

[Micke Gustafsson]

I have been printing some parts with standard settings 20% fill density, not that good... Quite fragil.

What settings is the best in fill density/shell thickness printing parts? 100% fill for all of them?

I´m using ABS.

[buildstoys]

I'm printing in PLA and using 30% infill with 3 shell thickness.  For "non-critical" parts I usually just do 15% infill with 2 shells.

[RobotGuy6]

100% fill is serious over kill... Max 50%... Also if you are using abs I suggest using an enclosure or strength will suffer too due to inter layer de-lamination...

On Monday, January 2, 2017 at 1:15:47 PM UTC-5, Micke Gustafsson wrote:

[Micke Gustafsson]

Thanks!

I´ll make som tests with 50% and 3 mm shell.

[rinoward...@gmail.com]

why different of fill density and shell.. what makes the effect in part?

[gael langevin]

Hello,

You might want to read this thread:
http://groups.google.com/forum/#!msg/inmoov/0j97e613IUw/CTvgVP3aDwAJ;context-place=forum/inmoov

Gael Langevin

Creator of InMoov

InMoov Robot

@inmoov

--
You received this message because you are subscribed to the Google Groups "InMoov" group.
To unsubscribe from this group and stop receiving emails from it, send an email to inmoov+unsubscribe@googlegroups.com.
To post to this group, send email to inm...@googlegroups.com.
Visit this group at https://groups.google.com/group/inmoov.
For more options, visit https://groups.google.com/d/optout.

[Kevin Watters]

The highest I've been able to do is about 97% .. Those parts are basically solid...

A better approach is to insert a metal screw through the center of the gears/pistons.. print at 75% for the gears and reinforce with a screw through the printed gears. Works great, very strong that way.