bill of materials?

[Some Guy]

Hello,

I started building my own. Did the finger starter, then started the right hand and arm.

When following the tutorial, it just says put motors in, put wires in, prepare your sensors for the fingertips, but I can't find any place where it actually details what all the non-printed materials are. 

Can anyone help me with that please?

[Mats Önnerby]

Hi

Here is the build description.

http://inmoov.fr/hand-and-forarm/

You need 6 servos of "standard" size like the mg996. You also need an Arduino. If you only want to build the hand an Arduino Uno is OK. If you plan to build the full robot, then an Arduino Mega is better choise. You also need a battery to power the servos. To move the fingers you need a fishingline. And screws to mount it together.  

/Mats  

[gael langevin]

The hardware and BOM map is here:
http://inmoov.fr/default-hardware-map/

Gael Langevin

Creator of InMoov

InMoov Robot

@inmoov

--
You received this message because you are subscribed to the Google Groups "InMoov" group.
To unsubscribe from this group and stop receiving emails from it, send an email to inmoov+unsubscribe@googlegroups.com.
To post to this group, send email to inm...@googlegroups.com.
Visit this group at https://groups.google.com/group/inmoov.
For more options, visit https://groups.google.com/d/optout.