eaaier way to build the eyes for inmoov i2

[Doron Berezovitz]

Hi guys  i had a problem in  connect to shafts to the eye socket so i   did some modification

1) change the  socket  so the slot  for the tiny hinge will   be   deeper and    not 1  mm 

2) create a new tiny hinge with the  side pin longer

3) make  a cut in the socket  round  base plate (not all the way  but about 10 mm )

so i can " open " it  so i can easily attach both  hinges . to repair  the socket i use some plastic model  glue   i attach an stl for  both the new hinge and new socket if  any one what to use them 

' 

'

0