HK15338's back in stock

[Perry S]

Here's a low cost alternate servo to the 805's. I use them and have decent luck. Easy to modify for 360 deg rotation and metal gears. $15 USD

http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idproduct=23491

Perry

[Bob H]

Are you getting them from a North American warehouse?

[Perry S]

No. Intl warehouse. I get stuff there a lot. Takes about 7-10 days to get to Vermont in the USA.

[gael langevin]

These are the servos I have used for my second InMoov. They are good with metal gear and really cheap actually!

But beware, the motor is fitted reversed, that means it turns the opposite direction than the HS805BB.

And it is restricted in rotation to 90 degrees instead of 180 degrees.

All that can be solved though.

-Unsolder the motor from the pcb board

-Reverse the polarity of the motor by rotating it in it's cage of 180 degrees.

-Add on each side of the potentiometer a resistor.

Gael Langevin

Creator of InMoov

InMoov Robot

@inmoov

--
You received this message because you are subscribed to the Google Groups "InMoov" group.
To unsubscribe from this group and stop receiving emails from it, send an email to inmoov+un...@googlegroups.com.
To post to this group, send email to inm...@googlegroups.com.
Visit this group at https://groups.google.com/group/inmoov.
For more options, visit https://groups.google.com/d/optout.

[Bob H]

Has anyone tried the Futaba S3306 MG servo? 

https://www.servocity.com/html/s3306mg_servo.html#.V3sGvrgrKUk 

[Yann Venon]

Hi there, please what do u mean by : 

"

-Unsolder the motor from the pcb board

-Reverse the polarity of the motor by rotating it in it's cage of 180 degrees.

"

?

Thanks (some pic ?) 

[Perry S]

Here is a link with the information that Gael provided me.

https://groups.google.com/forum/#!searchin/inmoov/resistor$20servo/inmoov/ay91Yxh5AUg/k4nM4DoTiU4J

Perry

[Bob H]

The HK15338 servos are slower , 0.20 / 60 deg @ 6v   than the HS 805, 0.14sec/60 @6V. 

[Pedro Rego]

alyexpress = hs805bb easy and fast

[Bob H]

I've been looking on Aliexpress for the 805 servo's but I can't find them. Could you provide a link to them? Thanks

[Perry S]

Here's a link for you.

http://www.aliexpress.com/item/1pcs-100-Original-Hitec-HS-805BB-152g-24-7-kg-14-sec-major-high-torque-servo/32470654671.html?spm=2114.01010208.3.1.74hGUA&ws_ab_test=searchweb201556_10,searchweb201602_4_10017_405_404_301_407_406_10040,searchweb201603_8&btsid=50fe190f-d609-427c-b03a-3cc3a5440e68

As mentioned above the HK's are a little slower but the torque is comperable and they have an all metal drive train. For me the bug deal is that they are $15 as opposed to $40 for the 805's. It's a decent trade off and each can make their own decisions.