Questions about Speakers

linuxrodo Rodolfo

unread,

Oct 13, 2016, 3:32:58 AM10/13/16

to InMoov

Hello everyone I am going to ask two things 1. Is it necessary to print the two speakers (earspeakerLeftV1.stl. earspeakerRigthV1.stl) of the head, or just one? 2. There is a piece called SpeakerMouthHolderV2.stl I'm not sure where it goes, but if I print it, it is necessary to use 3 speakers for the head?

I await your answers very grateful

gael langevin

unread,

Oct 13, 2016, 3:58:37 AM10/13/16

to linuxrodo Rodolfo, InMoov

The jaw speaker is mounted as in this blog post:
http://inmoov.fr/back-covers-released-and-realistic-eyes/

You can connect only one speaker, but the stereo sound is better in general

Gael Langevin

Creator of InMoov

InMoov Robot

@inmoov

2016-10-13 9:32 GMT+02:00 linuxrodo Rodolfo <linu...@gmail.com>:

Hello everyone I am going to ask two things 1. Is it necessary to print the two speakers (earspeakerLeftV1.stl. earspeakerRigthV1.stl) of the head, or just one? 2. There is a piece called SpeakerMouthHolderV2.stl I'm not sure where it goes, but if I print it, it is necessary to use 3 speakers for the head?
I await your answers very grateful

--
You received this message because you are subscribed to the Google Groups "InMoov" group.
To unsubscribe from this group and stop receiving emails from it, send an email to inmoov+unsubscribe@googlegroups.com.
To post to this group, send email to inm...@googlegroups.com.
Visit this group at https://groups.google.com/group/inmoov.
For more options, visit https://groups.google.com/d/optout.

linuxrodo Rodolfo

unread,

Oct 13, 2016, 4:07:13 AM10/13/16

to InMoov, linu...@gmail.com

Thanx Gael by solve my question :)

El jueves, 13 de octubre de 2016, 9:58:37 (UTC+2), gael langevin escribió:

The jaw speaker is mounted as in this blog post:
http://inmoov.fr/back-covers-released-and-realistic-eyes/

You can connect only one speaker, but the stereo sound is better in general

Gael Langevin
Creator of InMoov
InMoov Robot
@inmoov

2016-10-13 9:32 GMT+02:00 linuxrodo Rodolfo <linu...@gmail.com>:

Hello everyone I am going to ask two things 1. Is it necessary to print the two speakers (earspeakerLeftV1.stl. earspeakerRigthV1.stl) of the head, or just one? 2. There is a piece called SpeakerMouthHolderV2.stl I'm not sure where it goes, but if I print it, it is necessary to use 3 speakers for the head?
I await your answers very grateful

--
You received this message because you are subscribed to the Google Groups "InMoov" group.

To unsubscribe from this group and stop receiving emails from it, send an email to inmoov+un...@googlegroups.com.

Reply all

Reply to author

Forward