bertthin niciah harison
Carlos Beirise
Active@ Boot Disk Creator helps you prepare a bootable CD/DVD/Blu-ray or USB Flash mass storage device that you can use to start a machine with a damaged hard drive and recover data, recover partitions, wipe or erase data, create a disk image or repair security access issues.
If your USB Disk is not displayed in a combo-box, click the link below and initialize it properly. The only 32GB or less size partitions supported (for best compatibility with all types of BIOS & UEFI Secure Boot systems), so if you have 64GB USB, initialize it with the only 32GB partition.
If you've created ISO Image file, you can burn it up later on, either using our free Active@ ISO Burner utility (www.ntfs.com/iso-burning.htm), or have a disk burning utility that you prefer to use, use it to burn the ISO on a disk. Section 1.3.2 has instructions for some other utilities.
Active@ Boot Disk provides an easy and reliable solution for accessing data and repairing your computer in the event that Windows completely refuses to start up. It contains a complete set of useful utilities to assist you with repair tasks, data recovery, system maintenance and data security...
To continue the train of reviews on software developed by LSoft Technologies Inc., I'll be reviewing one of their core products: Active@ Boot Disk. What this software proves itself to be is a powerful disk utility tool that allows the user to create a portable, working bootable disk that...
Boot Disk Creator and Boot Disks are not supplied for macOS / OS X because newest Apple M1/M2 processors much differ from Intel architecture and do not support Windows-based or Linux-based bootable environments. If purchased commercial version, you can still request Boot Disk Creator for macOS /OS X plus related Boot Disks from us, however prepared bootable media will boot and erase the only legacy Intel-based Macs (not M1/M2).
Of course, this only applies to MBR disks (booted in BIOS/CSM compatibility mode). GPT disks should instead be using a EFI System Partition, identified by the partition ID rather than any "active" flag. Windows can only boot GPT disks in UEFI mode.
It's possible, but not certain, that you'll be able to boot the image you copied using my rEFInd boot manager. You can test this without installing anything to your hard disk by downloading the USB flash drive or CD-R image, preparing a boot medium with it, and booting it. If you're lucky, you'll see one or more entries for the Linux kernel(s) and/or the EFI boot loader from the Puppy Linux image you copied to your hard disk, and selecting that image should boot the OS.
That said, installing an OS in this way is highly non-standard, and there are a number of reasons why using rEFInd might not help in your case. I'm not very familiar with Puppy Linux, so I can't say how you're supposed to install it to a hard disk. Skimming its main page, I get the impression that it's intended mainly for use on USB flash drives and CD-R media, although there is one passing reference to installing it to hard disks. If you want to run something from your hard disk, there's a good chance that another distribution would be a better choice.
Your system has a UEFI firmware. Because of this, Windows requires you to format your hard drive as a GPT disk instead of an MBR disk (which you have). GPT disks do not have the concept of an "Active" partition the way MBR disks do. That's why the option is grayed out.
In a BIOS world with MBR disks, the computer simply boots to whatever partition has the Active flag on it. In a UEFI world, it's not so simple. To boot an operating system from another partition, you must add a boot entry for it in your EFI partition, and possibly your firmware setup. EasyUEFI looks to be a good tool for doing that, but I've never used it before so I can't vouch for its effectiveness. I have used EasyBCD before, but that tool is not relevant to what you're trying to accomplish.
This brings me to the second point I wanted to make. Even if you manage to get a boot entry for the second partition to appear, you cannot simply drop an ISO file onto a hard drive partition and boot from it. In order to install an operating system, you must have some kind of boot media to install from, whether that be a CD/DVD, external hard drive, or USB flash drive. It's not impossible to install Linux without those things, but it's not a standard way of doing things and there are few tools that can accommodate it (WUBI is a notable example of such a tool).
may I know the steps in details to report that the bootloader is not bootable anymore. did you just replaced the rootfs content?
we would like to reproduce the same issue locally, please share your steps to reproduce this on DevKits for reference.
thanks
I cannot provide detailed steps on how to reproduce this. What I can tell you is that it has happened two times to me after updating the sytem with a non bootable rootFS on the next slot. Usually the system attempts to boot it 3 times. I might have tried to unplug the system after it ran into the kernel panic to speed the process up. But I noticed that this does not count towards the 3 boots.
What I am sure about it that the only thing I did was replace the content of the rootFS partitions and change the variable to bootable with your command first and then with nvbootctrl to the other slot.
Hello. I strongly ask not to scold me here new.
I have a laptop, after updating the bios through the official program dell G5 15 5587, the problem began. The problem lies in the me region. Clearing the region would not be problematic if it were not for the Platform Protection in my case, the boot guard profile 5-fvme.
I ask to help, with a dump with a clean Me. Dump from spi attached, you need to clean me the region. Thanks in advance!
sorry for my english, i write with the help of a translator.
Upload your output SPI image after cleaning the Engine firmware to verify that the guide was followed properly. Also, upload a SPI dump after you have re-flashed the "cleaned" SPI image to verify the CSME firmware health.
However, switching to the one the image "me bad.bin" was originally build with (12.0.0.1069), did the trick thankfully so I was able to see the configuration settings properly and thus continue with the guide.
I have been on a quest to find the perfect leather hiking boot for many years now. I have been challenged by both many miles of trail as well as changes in boot manufacturing trends, but in this video I take the plunge on Scarpa with a deep dive comparison between their Terra GTX hiking boot and their SL Active backpacking boot. Which one will win my heart?
My Raspberry Pi boots full blown Ubuntu from my 1tb SSD. I want to change the OS on the SSD from Ubuntu to Lubuntu (I'm not concerned with the contents of the SSD). I'm trying to boot from my original Ubuntu bootable Micro SD card so that I can format and re-image the SSD with Lubuntu but the RPi always boots from the SSD.
From there, for booting, target a USB drive (I'm assuming) with the Lubuntu installer image on it, and just overwrite everything on the SSD. Once installed, reset the config.txt to boot from the SSD and you should be good to go. This kind-of thing is explained pretty well (maybe too verbose) in the raspberry pi documentation:
At UKC/UKH we are all experienced internet users and as such we understand why some people want to use Ad Block to remove annoying and distracting advertising that proliferates on some web sites. We don't feel that UKC/UKH should be considered as such a site.
We have developed a site that has subtle and appropriate advertising; we don't use pop-ups, we don't force you to read adverts before you can see content, we don't plaster content with adverts, and we don't use third party ad servers dishing up totally inappropriate advertising. We have worked incredibly hard over the years to make sure that we keep a good balance between advertising and editorial content.
Scarpa's SL is 35 this year, having first hit the trails back in 1983. A lot has changed in the outdoor world since then; now in its ninth version, has the new SL Active kept pace? The model was initially designed with the UK market in mind, and since it's sold well over 120,000 pairs in Britain alone, and consistently ranked among the top sellers here, Scarpa has clearly been doing something right.
Like Dr Who, this boot has been through many incarnations over the years, but going on the adage that if something ain't broke then you shouldn't try to fix it, the upgrades have tended to be gradual rather than radical. Despite its up to date tweaks, at its heart the new mark nine retains the essential SL character that many will know and love.
This is a benchmark 3-4 season boot. For a non-technical walking boot it's definitely at the stiffer and weightier end of the spectrum, which isn't going to suit every user or every situation. But if you want a quality leather boot that combines plenty of support with a high degree of comfort (once broken in) then this must be one of the best available. The SL Active still determinedly bucks the flimsy ultralight trend, erring instead towards solid durability. And crucially, it remains an all-leather boot. As I'm no fan of waterproof linings in footwear for year-round use, I'm pleased to see that Scarpa have continued to resist the market pressure here.
Firstly, the new version has shed a bit (not a lot) of weight. The fit has tightened up too, with a new lower volume last. Instead of the harder, shinier full grain leather of the previous version, the cuff and parts of the tongue now sport a softer and more luxurious nubuck. And inside, the heel area is now lined with leather, which should wear better. It's got new lace eyelets too, though I can't say they're better as such.
In recent times, it seems we've come to expect footwear that's comfy straight out of the box. If you've forgotten what a chunky traditional leather boot feels like when brand new then it can come as something of a surprise - these things need breaking in. I remembered that the hard way, mid-way through an all-day walk - a rash choice for my first outing with the new SLs. At first they felt cumbersome and uncompromising on the feet, and I soon developed a corker of a heel blister. Did they simply not fit, I worried (always a concern if you've got to review a boot). For my next couple of walks I was more restrained. The boots soon softened in the right places, and they now feel a lot more nimble and well-fitting. Having got that awkward getting-to-know-you period out of the way we're getting on fine with each other. Don't make the same mistake; start them off gently.
c01484d022