Hpe Configurator Tool

[Amatista Sheeley]

3In order to enable the 5th color capability on the system, you need to select the 5th Station Replacement Unit Type S14 with at least two 5th color toners, the 5th Station Hardware Upgrade Kit Type S9 with your color controller and the Trained Customer Replaceable Unit Type S14 Model C.

2. The 5th Station Replacement Unit Type S14 is needed for every plus one color purchased. For example, if white and clear toner are purchased, one 5th Station Replacement Kit Type S9 is needed. Or if white, clear and one neon toner are purchased, two 5th Station Replacement Kit Type S9 are needed.

2. Extension Output Banner Sheet Tray Type S14 cannot be installed with SR5000 Series Output Tray for Banner Sheet Type S6, Plockmatic PBM350e, Plockmatic PBM5035, Plockmatic PBM5035s or any related options.

3. When this option is added in a configuration with Plockmatic PBM350e, Plockmatic PBM5035, Plockmatic PBM5035s or any related options, then this option must be installed on the upper tray of Finisher SR5110 or Booklet Finisher SR5120.

2. Fiery CPS V5.X ES-3000 1 Year Digital cannot be installed with Fiery CPS V5.X ES-3000 3 Year Digital, Fiery CPS V5.X ES-3000 5 Year Digital, Fiery SB Kit CPS V5.X Software Only 1 Year, Fiery SB Kit CPS V5.X Software Only 3 Year or Fiery SB Kit CPS V5.X Software Only 5 Year.

2. Fiery CPS V5.X ES-3000 3 Year Digital cannot be installed with Fiery CPS V5.X ES-3000 1 Year Digital, Fiery CPS V5.X ES-3000 5 Year Digital, Fiery SB Kit CPS V5.X Software Only 1 Year, Fiery SB Kit CPS V5.X Software Only 3 Year or Fiery SB Kit CPS V5.X Software Only 5 Year.

2. Fiery CPS V5.X ES-3000 5 Year Digital cannot be installed with Fiery CPS V5.X ES-3000 1 Year Digital, Fiery CPS V5.X ES-3000 3 Year Digital, Fiery SB Kit CPS V5.X Software Only 1 Year, Fiery SB Kit CPS V5.X Software Only 3 Year or Fiery SB Kit CPS V5.X Software Only 5 Year.

2. Fiery SB Kit CPS V5.X Software Only 1 Year cannot be installed with Fiery CPS V5.X ES-3000 1 Year Digital, Fiery CPS V5.X ES-3000 3 Year Digital, Fiery CPS V5.X ES-3000 5 Year Digital, Fiery SB Kit CPS V5.X Software Only 3 Year or Fiery SB Kit CPS V5.X Software Only 5 Year.

2. Fiery SB Kit CPS V5.X Software Only 3 Year cannot be installed with Fiery CPS V5.X ES-3000 1 Year Digital, Fiery CPS V5.X ES-3000 3 Year Digital, Fiery CPS V5.X ES-3000 5 Year Digital, Fiery SB Kit CPS V5.X Software Only 1 Year or Fiery SB Kit CPS V5.X Software Only 5 Year.

2. Fiery SB Kit CPS V5.X Software Only 5 Year cannot be installed with Fiery CPS V5.X ES-3000 1 Year Digital, Fiery CPS V5.X ES-3000 3 Year Digital, Fiery CPS V5.X ES-3000 5 Year Digital, Fiery SB Kit CPS V5.X Software Only 1 Year or Fiery SB Kit CPS V5.X Software Only 3 Year.

2. Fiery Graphic Arts Pro - 1 Year cannot be installed with Fiery TotalFlow Bundle Advanced with GA Pro Subscription, Fiery Graphic Arts Pro - 2 Year, Fiery Graphic Arts Pro - 3 Year, Fiery Graphic Arts Pro - 4 Year or Fiery Graphic Arts Pro - 5 Year.

2. Fiery Graphic Arts Pro - 2 Year cannot be installed with Fiery TotalFlow Bundle Advanced with GA Pro Subscription, Fiery Graphic Arts Pro - 1 Year, Fiery Graphic Arts Pro - 3 Year, Fiery Graphic Arts Pro - 4 Year or Fiery Graphic Arts Pro - 5 Year.

2. Fiery Graphic Arts Pro - 3 Year cannot be installed with Fiery TotalFlow Bundle Advanced with GA Pro Subscription, Fiery Graphic Arts Pro - 1 Year, Fiery Graphic Arts Pro - 2 Year, Fiery Graphic Arts Pro - 4 Year or Fiery Graphic Arts Pro - 5 Year.

2. Fiery Graphic Arts Pro - 4 Year cannot be installed with Fiery TotalFlow Bundle Advanced with GA Pro Subscription, Fiery Graphic Arts Pro - 1 Year, Fiery Graphic Arts Pro - 2 Year, Fiery Graphic Arts Pro - 3 Year or Fiery Graphic Arts Pro - 5 Year.

2. Fiery Graphic Arts Pro - 5 Year cannot be installed with Fiery TotalFlow Bundle Advanced with GA Pro Subscription, Fiery Graphic Arts Pro - 1 Year, Fiery Graphic Arts Pro - 2 Year, Fiery Graphic Arts Pro - 3 Year or Fiery Graphic Arts Pro - 4 Year.

2. This option is not mandatory for the dealer channel. If this configuration is for the dealer channel, you can unselect this option. No tooltip available. 409555 Trained Customer Replaceable Unit Type S14 Model BTrained Customer Replaceable Unit Type S14 Model B Contains an entire fusing unit.Includes: Fuser Unit (qty = 1).Note: 1. This option has been automatically preselected since it is required for the direct channel.

2. This option is not mandatory for the dealer channel. If this configuration is for the dealer channel, you can unselect this option.3. By choosing this option, Trained Customer Replaceable Unit Type S14 Model D will be added to your configuration.

2. This option is not mandatory for the dealer channel. If this configuration is for the dealer channel, you can unselect this option.3. By choosing this option, Trained Customer Replaceable Unit Type S14 Model B will be added to your configuration.

2. This option is not mandatory for the dealer channel. If this configuration is for the dealer channel, you can unselect this option. No tooltip available. SW-BACKUPKIT Fiery Clone Consultation and ServiceFiery Clone Consultation and Service A cloning service for the Color Controller N-50A or Color Controller N-70A.Note: 1. This option has been automatically preselected since it is required for the direct channel.

Ricoh USA, Inc., 300 Eagleview Boulevard, Exton, PA 19341, 1-800-63-RICOH. 2024 Ricoh USA, Inc. All rights reserved. Ricoh and the Ricoh Logo are registered trademarks of Ricoh Company, Ltd. All other trademarks are the property of their respective owners.

İ am employee of juniper partner. i used configurator tool once and did a list. And i finished my job before i closed the page. but after than (almost after 3 hours), when i tried to reach configurator tool, i couldn't do that. when i click it, domain name is changing, its like going another page (iam-sso bla bla), but it refresh itself and come back home page again that target=_blank

But i think my session is not closed at juniper.net. because when i closed the page and opened a new page, i click log in button, and it log me automatically, dont ask nay information about authentication.

The tool straightforward for us to navigate. However, the tool is quite some time consuming as it loads right after you select each option or tried to input a character on each fields. Is it possible to change this approach? Like the page will load at the end of transaction or right after I completed filling up all required fields.

Secondly; I'm a part of the technical advisory board on this tool and will raise the requests as well at our next meeting - but no promises that it can be changed as I see some validations being done at each step. But overall I agree - it takes too long if you try to add multiple types of transceivers.

It looks like you are trying to use PAN-Configurator instead of the PAN Migration tool. The initial error that you are seeing is that it can't seem to resolve to github which would be something that needs to be fixed depending on where/how you are installing.

The lib/panconfigurator.php is one of the libarary file sources, If you are not able to open that file then pan-configurator is always going to fail to load correctly. @cpainchaud would be able to help you more than I can.

But with the release of 10.49 the JAMF LAPS solution is looking a lot better than initially. So I have created a couple of tools to help configure the LAPS settings and view the LAPS account and password.

But one piece of advice. You should mention in your notes on github that the solution specifically uses swiftDialog for the UI. I see in your script you have a section where it downloads the latest version of swiftDialog if needed, but you can't assume every environment will be able to do this. For example, I work at a bank, and so, highly regulated environment. Github is blocked for many users (I have access to it, and so do some others), and also we use an authenticated web proxy, for which github is not one of the excluded sites, so all curl commands must be preceded with a --proxy string for curl to work at all.

Just some things to think about. As it is, for some people your solution may not work since they may not be able to auto download swiftDialog if it needs to do that. They can always pre-deploy swiftDialog of course to meet that requirement. If it's mentioned in your notes, others will know what they need to do to get it to work.

great point.. with how things are with supply chain attacks.. we don't allow any remote ingest of code or pkg or ..anything ... not matter where or who.. (and im surprised some people think this is acceptable)

Lol I'm expecting a gui interface anytime soon so I'm sure to slack off with the development in time. But for now this at least makes using jamf laps a little nicer and more user friendly for some admins.

As stated it's very early release and I guess if admins in highly restricted environments need to use apps like swift dialog then these can be pre-deployed in a secure way and the scripts can be tweaked.

Yes, all good. You saved me from doing some of this work myself. I've had it on my "to-do" list since Jamf introduced this new LAPS solution. I may make a few modifications to it to fit my environment.

So after my session at JNUC I've had a lot of great feedback and have now taken some of these points to action. I've now updated my main LAPS solution with a lot of new features which can be found here.

@jobscommasteve my LAPS solution doesn't touch existing accounts or the JAMF management accounts. JAMF LAPS however will take control of your Pre-stage and user initiated management accounts. By default since 11.3 JAMF LAPS is enabled by default on user enrolled devices.

Jamf's purpose is to simplify work by helping organizations manage and secure an Apple experience that end users love and organizations trust. Jamf is the only company in the world that provides a complete management and security solution for an Apple-first environment that is enterprise secure, consumer simple and protects personal privacy. Learn about Jamf.

3a8082e126