Impedance Spectroscopy

Excellent program! I did some early testing with the author, and the program has wide support for all

Hi, Can anyone share the zview version that can go for more than 50 points. Thanks & Regards Dr.

it's also worth remembering that to get to f > 1 MHz really does require attention to wiring

Hi every one, I am new to this field and I am having difficulties in guessing the starting values for

Adding the pictures you forwarded to me in case you still can not upload... Btw you have to use

In EIS spectra that show Warburg behavior, is there any relationship between Warburg element (

Dear Group members Please find the attached picture, in which I tried to put my query. Please suggest

I have seen some discussion about issues when installing MEISP multiple impedance spectra fitting

Dear Yevgen: Thanks for the good news. Will I get a copy? I hope all goes well with you. Best wishes

Hi everyone, Any one have ZView software that can take 50-60 points i also need help in curve fitting

Respected Sir, I am very much interested to work on the development of electrochemical energy

To all interested: The Scientific and Technological Research Council of Turkey just published a

Hi Greadey, Thank you for reaching out. They do have a graphic corresponding to different setups, but

Hello everyone. I have just joined this group. Could you plz tell me how to fit impedance data by

As the former Gamry employee who implemented the transmission line modeling and wrote the app notes,

Então ! Está onde ? 2018-03-01 7:32 GMT-03:00 Anderson Silva <btkin...@gmail.com>: Hi Umair,

Dear Ester, which version of the manual are you using? In my version (V8.13, May 2015), in the

Dear Enrico, it would be helpful to see one of your spectra so to better understand the problem.

Hello! I am in need of this device It is a four gold microband electrode which I purchased from

Dear Yevgen, the link in your reply is where I found the software, so I had already tried some of its

Hi, If you are using R(CR) - which I'm interpreting to be a resistor in series with a parallel

give the steps and which circuit is suitable to run levm for abo3 perovskite ferroelectrcis to get

Posted on behalf of Prof. Dr.-Ing. O. Kanoun: ********************************************** Dear

I'm working on a solid Potassium Bismuth Titanate (KBT) material. I've data of frequency,Real

I have the data of real and imaginary impedance meassured at differnt frequncy upto one mega hertz at

Dear Yevgen Barsukov Thanks for your reply. The objective of my EIS analysis was to study the

Dear Kur It is working.. no points limit. Thanks. YJ.Lee 2017년 3월 29일 수요일 오후 5시 16분 4초 UTC+9, Kur@ 님의

Dear respected members, I have published a study using LEVM: http://www.sciencedirect.com/science/

Hello Prof. Macdonald, I have some data for complex impedance constant of an oxide in the frequency

Trying to make it post image: On Friday, January 20, 2017 at 12:49:56 PM UTC-6, Yevgen Barsukov wrote