Driver XPS MiniView For Windows 10 64-bit 11
Vaniria Setser
The machine runs like new now, everything else works flawlessly, and thanks to the 64 bit upgrade, I splurged on some extra memory, going from 3 Gbs to 8 Gbs from Crucial after the operating system upgrade, again, no problems at all. *The first few boots though, I would swear the machine loaded slowly as Windows 10 tried to sort out if it was the same machine. Imagination? I don't know, don't think so though.
Did you instal Windows 10 on to an SSD or upgraded your OS on the RAID setup? I did have Windows 7 running on a 60GB SSD, but for some reason was unable to upgrade to Windows 10 on the 420 as it just kept erroring, so I removed the drive and installed the OS using a different PC. Now, with the SSD back in the 420 it will not boot from the SSD. Doe anyone have any ideas why?
Driver XPS MiniView for Windows 10 64-bit 11
I don't know why you were unable to upgrade to Win 10 from your Win 7 installation on the SSD while it was mounted in the XPS 420, but after upgrading the OS on a different machine if you you were unable to make it work on the XPS 420 hardware...it may be because you installed the OS while the SSD drive was installed in a different PC-- with a different chipset. My techie friends tell me that is the trickiest part of transplanting harddrives with a cloned OS to a new machine.
It seems counterintuitive to me that you would be able to pull an SSD running Win 7 out of your XPS 420 and have it work in a new chassis with a new chipset to begin with, but I have heard that its possible. Perhaps the changeover to Win 10 OS while mounted on the new hardware eliminated the drivers that let it work on the XPS 420 to begin with...
I also got this running on my aged (Dec-2007) XPS 420. At first the Soundblaster X-fi soundcard and the TEAC CAB-200 19-in-1 integrated card reader and bluetooth did not work, but after putting the machine in "sleep" mode, upon waking suddenly I had sound again and my wireless keyboard and mouse were both automatically reconnecting under the logitech set point set up utility... I have no idea why that sleep mode made the difference, but it works now, so not complaining. I thought I was going to have to mess around with using compatibility mode and downloading obsolete drivers...but I didnt.
I also read that on some old processors NX may have to be enabled in the BIOS, however, looking through my BIOS, which is version A07, I can't see any mention of it or anything that sounds like it might be it.
I really don't want to spend over 100 at Crucial.com upgrading my memory from 4gb to 8gb just to find out that my processor is not compatible with 64 bit Windows 10, so any advice here would be very much appreciated.
Since the upgrade however I've had nothing but problems, with my system freezing up completely sometimes for no apparent reason, forcing me to hard reset, slow responsiveness due to the memory filling up rapidly or my hard disk being accessed constantly, display driver crashes, and for some reason the fan on my GPU stopping every now and then.
First I would like to thank those that went on before me with this endeavor. I installed 8 Gbs of ram and a 500 Gb ssd. The Windows 10 64-bit installation went without a hitch. Loosing the mini screen was no big deal since I never used it anyway.
I had the same experience with my 420. Never an issue, upgraded to Windows 10 after a year of working with insider additions and providing issues as they occurred in applications. The retail works pretty darn good and is fast fast fast. Dell built in camera gave me a run for a bit but all was resolved in later fixes without the need fro workarounds. Getting ready to try the memory upgrade now after doing the research on the X38 chipset which should allow 16 GB of 800 MHZ DDR2 (even ECC) of not hobbled by OEM. Will share in a few minutes. 8 GB on DDR3 is capable according to Intel but I am dubious on both of the last counts). Great to see Dell makes a nice machine with value over so many years.
You can Download a Windows 10 .iso, make a Bootable USB and install Windows 10 Home without a key... The its just a look to see what option is cheaper; sometimes retail media can strangely be cheaper than the download direct from Microsoft's website.
I realize this is an old thread, but I thought I'd give it a try anyway. I've upgraded my old XPS 420 to Windows 10 Pro 32bit, works great for me as a Plex server. I've never used the RAID feature on the MB but would like to as my "DeathStar" drive has an occasional click to it (has had for about 5 years now but hasn't died) Anyway. . .I was wanting to stick another drive in, use RAID 1 to avoid losing any data on it, but I seem to be hitting a snag getting the Intel matrix storage driver and application to install. Any suggestions?
This is an amazing machine, still running well with the latest spring 2020 window 10. Along the way did a few minor upgrades - a faster CPU, a 6 monitor visiontek (6x1080p), and of course an SSD. Performs nearly as well as modern systems bought last year.
b1e95dc632