meagisid anielo clarkson
Irmgard Rossie
Usually going to settings/Apps/Netflix and then "Force Stop" has solved the problem. But it got too frequent (and general TV slowness), so I did a factory reset of the TV. But the problem is still there!
To restart, unplug the TV's power cord from the power outlet and wait a few seconds to plug it back in. Alternatively, you can press and hold the Power/Off button on the supplied remote control to reboot.
I have similar and very annoying issue. Restarting tv helps (but takes time) or forcing the app to close. Then Netflix works well until tje second time I try to open the app. Always stucks at the loading screen and back button on remote does not work. I can start Netflix using inbuild chromecast but tv gets quite un reponsive after the casting stops. Easiest seems to be navigating to settings and apps and forcing close. Yesterday I noticed similar loading issue with another streaming app (one that I haven used in months), but didn't have the time to try to shut down the app or reinstall it.
Hi,
I've actually tried that several times already. On/off, power cycle, full restart. When it didn't work, I resorted to doing a factory reset of the TV. So setting up the TV fresh didn't help either.
I'm having no problem running Netflix otherwise on that connection (not even througgh an Apple TV plugged into the TV). Its just the Netflix app on the Android TV interface that's struggling. All the other built-in apps (like YouTube etc) work just fine.
Regards,
That's just terrible, looks like you're in the same boat as me.
And since my TV is a 2015 model, its unlikely that there is much being fixed/updated at Sony via software updates either. So if this problem doesn't solve itself, I have no option but to get rid of the TV. Live in a different continent now than when I bought it, so service/support/repairs will be a challenge.
Good to hear that reinstall helped someone. I tried to unistall Netflix but since it is a system app, only option is to return to factory version of it. Already tried removing all updates and reinstalling, and cleaning cached files. Same problem occurs again the next day. So everything is ok for the first use, but after tv has been turned off (not powered off) after that netflix won't start. My tv is XD8577.
There is sound coming from CRAVE, DEMAND, PVR recorded shows as well as satellite television. I have tried all the usual tricks, power off everything, reset the 9500s, reset Netflix, nothing resolves this problem. Netflix runs normally for me from my Smartphone, computer and from my Sony and Samsung Smart TVs.
That article was not helpful, thx since audio works with everything on the 9500 expect for Netflix. This issue materialized on both 9500s, not the 7500 since Netflix is not available as an app on the 7500, unless that got pushed by Bell and I just haven't checked for awhile.
The problem is now resolved on one of the 9500s. Earlier today, Bell support sent me one replacement 9500 which I installed last night and it seems that everything is working as it should - inlcuding sound from Netflix. I should also note that the replacement 9500 doesn't have the CRAVE app in the app menu. If CRAVE ever gets pushed to this 9500 and reappears in the app menu, I will not run it.
Just connected my replacement 9500 receiver,and still no audio from netflix app.This is the same problem as the new 1st receiver,3weeks old installed by Bell.All tv ,and recordings and Crave work perfect.Tryed rebooting and also reloading Netflix app stll picture but no sound.When you exit the Netflix app ,it most times reboots receiver.Once again this is the same problem as the 1st one.I think you guys have a problem in your Netflix software.
I also just connected a 9500 replacement receiver and have picture but still no sound from Netflix app. I was able to get sound from Netflix using the optical output from the receiver but you need an amplifier with an optical input. There definitely is a problem with getting sound from Netflix using the HDMI output.
Just received my first 9500 as a replacement for an unserviceable 9400. Stumbled upon this forum when asking the internet the question "no sound from Bell 9500 when using the embedded Neflix App". Therefore, this is my first foray on this forum but by way of introduction I am a first adopter of Bell Satellite since way before the 4700 and I have experienced more than my fair share of sat receiver replacements. When the tech and I first connected this 9500, I noticed that there are no longer component outputs on the 9500 receiver, just old composite analogue cable technology to go with HDMI. Now there is a step forward. I guess Bell does not want you to feed two HD monitors from one receiver anymore. But I digress. The tech showed me how to access the Netflix and Crave apps using the new remote. OK. Good to know. Another option for receiving these services other than from my other devices. However, when I started experimenting with Crave and Netflix reception thru the 9500 using HDMI, exactly the same thing happened to me as described above, picture, with no sound, on Netflix. When selecting Crave on the 9500, picture and sound no problem, thru the same HDMI connection. I also noticed that after exiting Netflix from the 9500, the receiver would automatically reboot every time, again just as described by other users above. Finally, when I get back to satellite TV after a 9500 reboot, the picture and sound again have no problem thru the same HDMI connection. From a trouble shooting perspective, the HDMI 1 connection to/from the main Audio Video Receiver (AVR) is the same, the audio selections on the AVR HDMI 1 connections are the same, the connections to the 9500 are the same, the audio selections on the 9500 are the same, the HDMI 1 cable is the same, all other devices with Netflix and Crave such as smart TV direct, smart OPPO Blu ray player, smart phone thru chromecast operate normally with audio and sound on Netflix and Crave. The only item that changes is selecting Netflix thru the 9500 App. Thus I can only agree with Peter476, that from this troubleshooting of the "new" 9500, there is a problem right from brand new with the HDMI handshake coming from the 9500 HDMI output to the AVR input when using Netflix. You get video, no sound on Netflix on the first handshake and when you leave the Netflix app on the 9500 the resulting HDMI handshake to get back to satellite reception causes a full reboot of the 9500. Houston, I believe that we have a common problem with the 9500 Netflix app right from brand new. Thanks for listening.
Hi there @Griffon, thanks for your post, and welcome to the Bell Community.
Do you have the option of testing out the suggestion above from @Peter476? They were able to get audio on Netflix when using the optical output.
Are you accessing Netflix by clicking the Apps button on your remote, or by launching channel 1267?
Keep the Community posted.
- Patricia
I did not try to get Netflix audio using optical output because it sorta defeats the purpose of one connector, HDMI, for both audio and video to the AVR AND HDMI is not providing the audio from Netflix. Maybe Bell should be troubleshooting this. I was only trying to access Netflix using the App button on the 9500 remote, not chan 1267. When I discovered the issues with accessing Netflix thru the 9500 remote app I was reluctant to cause more issues and 9500 rebooting by accessing Netflix at all thru the 9500 using chan 1267. I have returned to using my other devices for Netflix access rather than the 9500. Maybe Bell can advise of a permanent fix when they troubleshoot their equipment hardware and software.
Same issue, go to load netflix, spinning red circle and get nowhere. Only on main box not mini or phone/tablets. Just adding to the list as the more that comment the more they may eventually take notice. The only thing that seems to work is logging into another app then going back and trying 3 or 4 times.
However, my Qbox is in an IT rack in a separate room from the TV . It plugs into a Denon amp which in turn is connected to an HDMI extender to send the signal along cat6 to the TV where it is converted back to HDMI and plugged into the TV.
The Sky tech said was an issue with the Netflix coding that preventedbit from loading and the only way to confirm this is to plug it directly!! However it's been working fine for 4 years and does sometimes work!!
Hi Mark, my sky q box is connected directly to the TV and I am still having the same issue like everyone else. Up until July I had no problems with it. I can watch it on my smart TV, mobiles laptops without any issues but only issue is on the actual sky q box only.
Yeh I have called them many times since July & each time they go through the settings & when they realise everything is all it should be just refresh the apps & tell me to give it 24 hours which works for a few days & then it happens again.
On Saturday I got fed up & made an official complaint to sky. They got in touch & wanted to put me through the technical team to see if they can fix it but since I refreshed the apps on Saturday it has been working fine.
@LSRahman I have had a similar experience. The person helping me is really nice, but they've just been getting me to do the following over and over and in different order, even though I'd tried all these things before even raising the issue:
I don't think they've asked me to try anything I hadn't done before, and when the case was escalated to the back office tech team, they made exactly the same suggestions. There seems to be a reluctance from Sky to accept any responsibility for these various issues with the Netflix app, and they seem to constantly say it's something I've done or something specific to my box, even though there's 100 posts here of people with the same issues.
Nit sure if it's coincidental, but this issue happened as soon as Virgin upgraded my Wi-Fi to fibre, although looking at when everyone else's issue started, it seems to be a coincidence that the upgrade was at the same time.
90f70e40cf