IDE64 at C128DCR with internal Swiftlink Wifi Modem

[pcollins]

hey guys,

I want to use IDE64 with a C128DCR and an internal Swiftlink Wifi Modem (https://github.com/dabonetn/Swift-Internal).

Without the IDE64 it works fine, but with the IDE64 the Swiftlink Modem doesn't work anymore. 

The Swiftlink Modem is set to $DE00, so could this be the problem?
I could also switch over to $DF00 or $D700.

https://github.com/dabonetn/Swift-Internal/blob/master/QuickInstallGuides/Swift-L.pdf

Is the IDE64 also using $DE00 and there is now a conflict with the Swiftlink?

regards pcollins

[Count Zero]

Yes, the IDE64 uses registers in the $DE00 range.

From the FAQ:

$de20-$de37 – registers of the controller
$de5f – register of the real-time clock
$de60-$deff – addresses used by the software

-CZ

--
You received this message because you are subscribed to the Google Groups "IDE64" group.
To unsubscribe from this group and stop receiving emails from it, send an email to ide64+un...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/ide64/dccbe85b-7c79-4e8b-80aa-a9e0d4b6cd99n%40googlegroups.com.

[pcollins]

So, I should set the Swiftlink Wifi Modem to $DF00 or $D700 and it would work, right?

[Count Zero]

I can't guarantee it would work, as I do not own a Swiftlink, but that is what I would try, yes.

-CZ

To view this discussion on the web visit https://groups.google.com/d/msgid/ide64/86fb2af4-88f5-4eaa-ba7b-96e439b9b554n%40googlegroups.com.

[Maciej Witkowiak]

Hi

I recommend putting it at $D700 - it will not interfere with expansion port, it's easy to do on C128 and both DesTerm 3.2 and CCGMS will support it.

ytm

To view this discussion on the web visit https://groups.google.com/d/msgid/ide64/a4e36d84-0f65-9716-65ef-cf67ab0e2d47%40cyberdeck.org.