beryl
Hendy Irawan
http://www.beryl-project.org
--
Hendy Irawan
Web: http://hendy.gauldong.net
Mobile: +62 856 24889899
Yahoo Messenger: ceefour666
Fajran Iman Rusadi
>
> Ada yang sudah nyoba Beryl?
> http://www.beryl-project.org
pernah nyoba di Edgy Eft versi beta..
--
Iang-
http://fajran.net y!m: fajran
Zayn Hamdan
2006/11/11, Hendy Irawan <gaul...@gmail.com>:
>
> Ada yang sudah nyoba Beryl?
> http://www.beryl-project.org
--
M. Zayn Hamdan
weblog: http://www.big-grin.or.id
Hendy Irawan
q pernah nyoba nge-enable composite buat tampilan ala jaguar, plus
shadow dll. akhirnya jadi lambat :-( [padahal driver nvidia udah
"bener", OpenGL/glx jalan mulus]
zayn hamdan
kartu NVidia atau ATI, mesti menggunakan XGL. Setelah mencek X.org.log,
Edgy menggunakan AIGLX secara default? (CMIIW), coba deh cek
di /var/log/Xorg.0.log apakah AIGLX yang digunakan atau tidak. Jika ya,
seharusnya menggunakan XGL agar NVidia dapat berjalan mulus.
Overall, sangat stabil. Animasi ala Mac OSX seperti "genie" bisa
diterapkan di Beryl, namun ada beberapa bugs seperti saat mau log out,
layar tak merespon, hal ini karena bentrok dengan gnome-session.
Workaround: menginstal gnome-session yang tidak bentrok dengan Beryl
(ubuntuforums.org mungkin bisa membantu).
Saya yakin versi Feisty Fawn sudah bisa diinclude secara default Insya
Allah, karena Fedora Core 6 sudah menginclude-nya secara default. Kita
berdoa saja GNOME 2.18 atau GNOME 3.0 ? Akan menginclude-kan metacity
yang mendukung 3D desktop secara default.
Pada hari Sabtu, tanggal 11/11/2006 pukul 16:40 +0700, Hendy Irawan
menulis:
Andy Apdhani
> Saya menggunakan chipset Intel sehingga cocok menggunakan AIGLX, untuk
> kartu NVidia atau ATI, mesti menggunakan XGL. Setelah mencek X.org.log,
> Edgy menggunakan AIGLX secara default? (CMIIW), coba deh cek
> di /var/log/Xorg.0.log apakah AIGLX yang digunakan atau tidak. Jika ya,
> seharusnya menggunakan XGL agar NVidia dapat berjalan mulus.
>
> Overall, sangat stabil. Animasi ala Mac OSX seperti "genie" bisa
> diterapkan di Beryl, namun ada beberapa bugs seperti saat mau log out,
> layar tak merespon, hal ini karena bentrok dengan gnome-session.
> Workaround: menginstal gnome-session yang tidak bentrok dengan Beryl
> (ubuntuforums.org mungkin bisa membantu).
>
> Saya yakin versi Feisty Fawn sudah bisa diinclude secara default Insya
> Allah, karena Fedora Core 6 sudah menginclude-nya secara default. Kita
> berdoa saja GNOME 2.18 atau GNOME 3.0 ? Akan menginclude-kan metacity
> yang mendukung 3D desktop secara default.
>
> Pada hari Sabtu, tanggal 11/11/2006 pukul 16:40 +0700, Hendy Irawan
> menulis:
>> dibanding tampilan biasa.... apakah [jauh] lebih lambat?
>>
Mohon maaf sebelumnya itu om replynya pake _Top_Posting_ :) dan coba deh sebelum
reply lagi silakan liat2 dulu informasi guideline untuk milis yang ada disini:
http://wiki.ubuntu-id.org/EtikaMilis
Makasih atas perhatiannya & salam!
--
[ Andy Apdhani ]
-
User n.:
A programmer who will believe anything you tell him.
zayn hamdan
menulis:
Ok, terima kasih. Maklum kebiasaan menulis reply di atas alias Top
Posting :D
gandok
xfce maupun di gnome. aku nyoba di dapper.
Toosa
>
> beryl, keren lancar2 aja, tetep ringan, dan lagi langsung bisa jalan di
> xfce maupun di gnome. aku nyoba di dapper.
Apa perlu graphic card 3D ?
Kalau pakai standard saja bisa gak ya ?
--
Salam persahabatan
=Prihantoosa=
abu_nawas
driver 8776 nvidia, soalnya kalo make 9625, 9626,9629, 9742 gak bisa :(
alvonsius albert
abu_nawas wrote:
> beryl 0.1.2 berjalan lancar di edgy eft dengan xgl.
> driver 8776 nvidia, soalnya kalo make 9625, 9626,9629, 9742 gak bisa :(
Ya saya ... saya coba di dapper jalan, tapi masalah muncul waktu
suspend dan switch dari tty ke X lagi selalu hang dan tidak mau
ngapa2in lagi selain dimatikan paksa hiks hiks ... ada yang punya
hint??
btw ... baru tau ada milis id-ubuntu di gugel ... hik hik ketinggalan
berita banget :((
Andy Apdhani
>
> btw ... baru tau ada milis id-ubuntu di gugel ... hik hik ketinggalan
> berita banget :((
>
>
kasian deh ih baru tau skr! ehauehuaehe
met gabung om albert .. pa kabre medan bung?
yuk ah mari & salam!
--
[ Andy Apdhani ]
-
We cannot command nature except by obeying her.
-- Sir Francis Bacon
Alvonsius Albert
alvonsius albert wrote:
>
> btw ... baru tau ada milis id-ubuntu di gugel ... hik hik ketinggalan
> berita banget :((
>
>
kasian deh ih baru tau skr! ehauehuaehe
met gabung om albert .. pa kabre medan bung?
yuk ah mari & salam!
--
=-=-=-=-=-=-=-=-=-=-=-=-=-=
Alvonsius Albert N
Programmer / Web Developer
PT Gamatechno Indonesia
"Do whatever you like, but remember to take care all the responsibilities"
Currently Blog at http://alvonsius.blogsome.com
janu
nuri kidy
hasil googling sih menyatakan kantor pos pengadegan = di pancoran
st sabri
Gue lagi bingung nih dial GPRS kagak pernah berhasil dengan wvdial; di terminal outputnya spt ini :
--> WvDial: Internet dialer version 1.55
--> Initializing modem.
--> Sending: ATZ
ATZ
OK
--> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
OK
--> Sending: AT+CGDCONT=1,"IP","internet"
AT+CGDCONT=1,"IP","internet"
OK
--> Modem initialized.
--> Idle Seconds = 3000, disabling automatic reconnect.
--> Sending: ATD*99***1#
--> Waiting for carrier.
ATD*99***1#
CONNECT
~[7f]}#@!}!}&} }3}"}&} } } } }#}%B#}%}'}"}(}"@j~
--> Carrier detected. Starting PPP immediately.
--> Starting pppd at Mon Nov 13 07:51:21 2006
--> Pid of pppd: 6656
--> Using interface ppp0
--> pppd: @�[05][08]
--> pppd: @�[05][08]
--> pppd: @�[05][08]
--> pppd: @�[05][08]
--> pppd: @�[05][08]
--> pppd: @�[05][08]
--> pppd: @�[05][08]
--> Disconnecting at Mon Nov 13 07:51:26 2006
--> The PPP daemon has died: A modem hung up the phone (exit code = 16)
--> man pppd explains pppd error codes in more detail.
--> Try again and look into /var/log/messages and the wvdial and pppd man pages for more information.
konfigurasi wvdial.conf gini :
[Dialer Defaults]
Init1 = ATZ
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
Init3 = AT+CGDCONT=1,"IP","internet"
Password = proxl
Ask Password = 0
Phone = *99***1#
Idle Seconds = 3000
Modem Type = Analog Modem
Stupid Mode = 1
Compuserve = 0
Baud = 2400
Auto DNS = 1
Dial Command = ATD
Modem = /dev/ttyS0
ISDN = 0
Username =xlgprs
/var/log/demesg :
Nov 13 07:40:09 localhost kernel: [17179761.492000] pccard: PCMCIA card inserted into slot 0
Nov 13 07:40:09 localhost kernel: [17179761.492000] cs: memory probe 0xe8200000-0xe82fffff: excluding 0xe8200000-0xe820ffff
Nov 13 07:40:09 localhost kernel: [17179761.496000] pcmcia: registering new device pcmcia0.0
Nov 13 07:40:10 localhost kernel: [17179761.764000] ttyS0: detected caps 00000700 should be 00000100
Nov 13 07:40:10 localhost kernel: [17179761.764000] 0.0: ttyS0 at I/O 0x3f8 (irq = 3) is a 16C950/954
Nov 13 07:40:10 localhost kernel: [17179761.764000] ttyS4: detected caps 00000700 should be 00000100
Nov 13 07:40:10 localhost kernel: [17179761.764000] 0.0: ttyS4 at I/O 0x400 (irq = 3) is a 16C950/954
Nov 13 07:41:49 localhost gconfd (root-5862): starting (version 2.14.0), pid 5862 user 'root'
Nov 13 07:41:49 localhost gconfd (root-5862): Resolved address "xml:readonly:/etc/gconf/gconf.xml.mandatory" to a read-only configuration source at position 0
Nov 13 07:41:49 localhost gconfd (root-5862): Resolved address "xml:readwrite:/root/.gconf" to a writable configuration source at position 1
Nov 13 07:41:49 localhost gconfd (root-5862): Resolved address "xml:readonly:/etc/gconf/gconf.xml.defaults" to a read-only configuration source at position 2
Nov 13 07:41:49 localhost gconfd (root-5862): Resolved address "xml:readonly:/var/lib/gconf/debian.defaults" to a read-only configuration source at position 3
Nov 13 07:41:49 localhost gconfd (root-5862): Resolved address "xml:readonly:/var/lib/gconf/defaults" to a read-only configuration source at position 4
Nov 13 07:44:19 localhost gconfd (root-5862): GConf server is not in use, shutting down.
Nov 13 07:44:19 localhost gconfd (root-5862): Exiting
Nov 13 07:45:47 localhost exiting on signal 15
Nov 13 07:45:48 localhost syslogd 1.4.1#17ubuntu7: restart.
Nov 13 07:46:29 localhost kernel: [17180141.148000] CSLIP: code copyright 1989 Regents of the University of California
Nov 13 07:46:29 localhost pppd[6453]: pppd 2.4.4b1 started by tedjo, uid 1000
Nov 13 07:46:29 localhost kernel: [17180141.160000] PPP generic driver version 2.4.2
Nov 13 07:46:29 localhost pppd[6453]: Using interface ppp0
Nov 13 07:46:29 localhost pppd[6453]: Connect: ppp0 <--> /dev/ttyS0
Nov 13 07:46:32 localhost pppd[6453]: CHAP authentication succeeded
Nov 13 07:46:32 localhost pppd[6453]: CHAP authentication succeeded
Nov 13 07:46:33 localhost kernel: [17180144.656000] PPP BSD Compression module registered
Nov 13 07:46:33 localhost kernel: [17180144.736000] PPP Deflate Compression module registered
Nov 13 07:46:34 localhost pppd[6453]: LCP terminated by peer (^[)
Nov 13 07:46:34 localhost pppd[6453]: Modem hangup
Nov 13 07:46:34 localhost pppd[6453]: Connection terminated.
Nov 13 07:46:35 localhost pppd[6453]: Exit.
Nov 13 07:47:16 localhost pppd[6509]: pppd 2.4.4b1 started by root, uid 0
Nov 13 07:47:16 localhost pppd[6509]: Using interface ppp0
Nov 13 07:47:16 localhost pppd[6509]: Connect: ppp0 <--> /dev/ttyS0
Nov 13 07:47:20 localhost pppd[6509]: CHAP authentication succeeded
Nov 13 07:47:20 localhost pppd[6509]: CHAP authentication succeeded
Nov 13 07:47:21 localhost pppd[6509]: LCP terminated by peer (^[)
Nov 13 07:47:21 localhost pppd[6509]: Modem hangup
Nov 13 07:47:21 localhost pppd[6509]: Connection terminated.
Nov 13 07:47:21 localhost pppd[6509]: Exit.
Nov 13 07:47:47 localhost gconfd (root-6532): starting (version 2.14.0), pid 6532 user 'root'
Nov 13 07:47:47 localhost gconfd (root-6532): Resolved address "xml:readonly:/etc/gconf/gconf.xml.mandatory" to a read-only configuration source at position 0
Nov 13 07:47:47 localhost gconfd (root-6532): Resolved address "xml:readwrite:/root/.gconf" to a writable configuration source at position 1
Nov 13 07:47:47 localhost gconfd (root-6532): Resolved address "xml:readonly:/etc/gconf/gconf.xml.defaults" to a read-only configuration source at position 2
Nov 13 07:47:47 localhost gconfd (root-6532): Resolved address "xml:readonly:/var/lib/gconf/debian.defaults" to a read-only configuration source at position 3
Nov 13 07:47:47 localhost gconfd (root-6532): Resolved address "xml:readonly:/var/lib/gconf/defaults" to a read-only configuration source at position 4
Abdul Arfan
untung ayah saya tahu tempatnya
Abdul Arfan
http://arfan86.blogspot.com
milisdad
> Hi Pren,
>
> Gue lagi bingung nih dial GPRS kagak pernah berhasil dengan wvdial; di terminal outputnya spt ini :
>
smoga membantu.....
--
Dedy Hariyadi
---
http://www.milisdad.or.id
zayn hamdan
Atau lihat di sini:
http://www.big-grin.or.id/2006/11/11/modem-cdma-ku-bisa-digunakan-di-ubuntu-edgy/
--
M. Zayn Hamdan
Jual website dan weblog murah! http://www.big-grin.or.id
akbar rizqi
Konfigurasi di Ubuntu Server (q pake kabel USB HP j300 dan sukses)
Buat file wvdial.conf pada directory /etc/wvdial.conf dengan perintah :
$ sudo vi /etc/wvdial.conf
Masukkan baris berikut :
[Dialer Defaults]
Modem=/dev/ttyUSB0
Baud=57600
Init1=at+cgdcont=1,"ip","internet"
Init2=ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
ISDN=0
Modem Type=Analog Modem
Phone=*99***1#
Username="xlgrps"
Password="proxl"
Save konfigurasi dengan perintah :wq
Untuk menjalankan koneksi ketik :
$ sudo wvdial
Untuk menghentikan koneksi tekan ctrl+c
Silahkan mencoba...